What is the stock voltage of GF 3Ti200??

[KemoSabe]

Hi! All :)

I recently placed a GF 3Ti200 AGP based card in an A7V600 board with a 2500Barton @11x200 with vcore 1.7V

I must have accidently changed the AGP volts to 1.7v as well while I was in the bios since both settings are near...one above, the other below.

Its probably been like that for a couple of weeks until I just caught the error. I quickly set it back to Auto but I wanted to know what the stock voltage is suppose to be for these cards so I can manually set it myself.

The precise card is a Gainward GeForce3 PowerPack !!! Ti/500 TV 128MB DDR JUMBO "Golden Sample"

I realise it isn't wise to be changing the voltage of AGP cards as damage may occur. The card hasen't been OC'd yet but I would like to know the likelyhood of any damage which a setting of 1.7v may have had??

Thanks! :)

[stratcatprowlin]

I dont know the default voltage for ur particular card but 1.5v is common.

As far as damage resulting? I dont think so because the card has a built in voltage regulater so it will take only what it needs.

[KemoSabe]

Thanks! for the info. stratcatprowlin

Why does the MB allow you to change the AGP volatage settings?

Is it that you would have to do some volt mod to a particular card to take any possible advantage of this MB bios feature?

[stratcatprowlin]

Originally posted by KemoSabe
Thanks! for the info. stratcatprowlin

Why does the MB allow you to change the AGP volatage settings?

Is it that you would have to do some volt mod to a particular card to take any possible advantage of this MB bios feature?

Exactly.

[KemoSabe]

LOL....stratcatprowlin

I was picturing your cool avatar with a comic style balloon surrounding your reply....."EXACTLY!!!!":D

Nice one...thanks for the help buddy!