I fixed it! Vets READ!!

[brianm]

Ok all you overclocking hero's...I was overclocking my Abit WB6 with a 350p2 in it. I now have it running beautifully at 504mhz (fsb @ 143 or 150 voltz at 2.20) and the temp is below 90...always!! I have no cooling yet, just the normal fan...it's a slot 1 by the way. There celeron 300 (66fsb) was overheating (over 130 deg f) way to much at only 100fsb with 400mhz and voltz of only 2.0...the main problem I was having though....my screen looked horribly garbled...and I didn't know y...installed all new drivers and everything. If you are running win2k this is the solution....go do the display properties, click the settings tab, click the advanced button, go to troubleshooting and change the hardware acceleration until it looks right... :-) Hey 504mhz at less than 90 deg f temps with no cooling isn't all that bad? Right? :-) ;)

[Zuck Gou :)]

Way2go

[Shadow ÒÓ]

Very nice OC out of that chip! Glad to hear it!

[Endeavor]

brianm (Aug 01, 2001 10:54 p.m.):
Ok all you overclocking hero's...

he called me a hero... im touched.... *tear*

[Treker]

Endeavor (Aug 02, 2001 01:38 a.m.):
brianm (Aug 01, 2001 10:54 p.m.):
Ok all you overclocking hero's...

he called me a hero... im touched.... *tear*


*salutes and shines his purple heart while looking at his finger..*

I still remember the day.. it was a hot summer night.. there was cords all around me, but I was going in.. yes sirr.. I had to see if that fan was working... oh boy,, It was working .. it was...

-Trek

[brianm]

Well, luckily I read up in all these forums (and the database) before I did ANYTHING and it helped a lot! :-)

*Now that I've asked all the stupid questions I possebly could, on with the intelligent ones with my future posts...;)

[NeoMoses]

would you mind making a "HOWTO" on how you O/Ced your PII. I'm wanting to OC my PII333, but haven't found much info yet.

[brianm]

Yes, I would not mind at all...I'll get right on it within the next week. I say in the next week b/c of my job, I'm studying for A+ Certification and I am clean installing everything on my computer so give me a few days...ok? :-)

[AmbientFiction]

Way to go on that nice OC there man congrats!!!! Good luck on that A+ and just remember not to forget about Laser printers. I had a friend that almost failed that section.

[brianm]

I thank you and I have also heard, the laser printers are a killer...lol ;)

[Treker]

Treker (Aug 02, 2001 02:30 a.m.):
Endeavor (Aug 02, 2001 01:38 a.m.):
brianm (Aug 01, 2001 10:54 p.m.):
Ok all you overclocking hero's...

he called me a hero... im touched.... *tear*


*salutes and shines his purple heart while looking at his finger..*

I still remember the day.. it was a hot summer night.. there was cords all around me, but I was going in.. yes sirr.. I had to see if that fan was working... oh boy,, It was working .. it was...

-Trek


Ok, "I" though that was phunny! :P

-Trek

[brianm]

lol