lets pretend i had two systems that i wasn't going to overclock.so i can learn this.
system 1-------------------------!----------- system 2
-----------------------------------!----------------------------------------------------
cpu 1.1 ghz 512 cache 400 fsb --- !-- cpu 3.1 ghz 512 cache 400 fsb
same mobos
same gfx card
same ram
same the rest
question 1. are they the same speed? since the extra 2ghz travels gets blocked by the 400 mhz bus.
both systems run at 400mhz same speed.
true or false? explain pls.
question 2. if both systems had all same stuff but this
again no overclocking for system or gfx cards
system 1---------------------------!------------ system 2
----------------------------------!---------------------------------------
gfx card vpu 200mhz/250-----------!-----gfx card vpu 600mhz/800mhz
cpu barrton 333mhz ---------------!--------cpu barrton 333 mhz
would they run same speed ? or would system one have its bus
blocked at the gfx card because 333>200 or is it the 250?
help me understand pls?
or is this like a relay race where all the componets play a part and
if your total time for all runners was 18 secs and your fastest runner improved by .5 sec then at least we are at 17.5.so you dont have to always go after the slowest componet even though its the most effective.
the way i see it without overclocking you can never beat the bus of your board .so if i have a 400mhz board there is no point in dual channel ram at all.or paying for parts that go any faster than 401 mhz.
system 1-------------------------!----------- system 2
-----------------------------------!----------------------------------------------------
cpu 1.1 ghz 512 cache 400 fsb --- !-- cpu 3.1 ghz 512 cache 400 fsb
same mobos
same gfx card
same ram
same the rest
question 1. are they the same speed? since the extra 2ghz travels gets blocked by the 400 mhz bus.
both systems run at 400mhz same speed.
true or false? explain pls.
question 2. if both systems had all same stuff but this
again no overclocking for system or gfx cards
system 1---------------------------!------------ system 2
----------------------------------!---------------------------------------
gfx card vpu 200mhz/250-----------!-----gfx card vpu 600mhz/800mhz
cpu barrton 333mhz ---------------!--------cpu barrton 333 mhz
would they run same speed ? or would system one have its bus
blocked at the gfx card because 333>200 or is it the 250?
help me understand pls?
or is this like a relay race where all the componets play a part and
if your total time for all runners was 18 secs and your fastest runner improved by .5 sec then at least we are at 17.5.so you dont have to always go after the slowest componet even though its the most effective.
the way i see it without overclocking you can never beat the bus of your board .so if i have a 400mhz board there is no point in dual channel ram at all.or paying for parts that go any faster than 401 mhz.