Help over clocking P3

[Phantom]

I wont bore anyone with nonsense.. so..

basiclly i have a...

BH6(1.0style) Motherboard and a P3 550. Right now i have it running at 133fsb and making what 735mhz?

Anyway to run this at 150fsb?

Thanks guys..

DaveD

[jeff_harrison_344]

Well its all in the chip itself for as high as you can go, ah and also the motherboard :)

The best you can do it pick up a nice HSF (Glaciator, CAK38 ect.), and try increasing the FSB in 1 or 2MHz increments (if you can with your mobo), and push it down to your last option that works when you start getting lockups, and dont forget to watch your temps! :)

[funnyperson1]

you might have provblems with ram as well

[-Exi|e-]

If u have ur motherboards instruction manual, might be a good idea to take a look in it. I have a PIII1Ghz and the only way i could o/c it was to bump up the FSB via my motherboard, not the bios...