- Joined
- Mar 16, 2004
Well let me be frank. Im trying to OC my new M2400 in a MSI KT3 Ultra2 (KT333). I ran into a few pitfalls unfortunately with the older hardware.
1)My mobo, with latest bios, only lets me up the voltage to 1.675 for this CPU. I suspect this is because the mobo had safeguards and uses a +/- % of the stock voltage. Is there a way to get around this? Would modifying the L11 bridges be the easiest?
2)The CPU runs at 13.5x multi only. I tried setting it to other values but they don't take. The values listed in the bios go as high as 15x but reguardless of what I set it to it runs at 13.5x.
3)I think I have one more question but I can't remember now. I'll update this later.
1)My mobo, with latest bios, only lets me up the voltage to 1.675 for this CPU. I suspect this is because the mobo had safeguards and uses a +/- % of the stock voltage. Is there a way to get around this? Would modifying the L11 bridges be the easiest?
2)The CPU runs at 13.5x multi only. I tried setting it to other values but they don't take. The values listed in the bios go as high as 15x but reguardless of what I set it to it runs at 13.5x.
3)I think I have one more question but I can't remember now. I'll update this later.
