- Joined
- Feb 23, 2004
- Location
- Denver, CO
OK, i just built my rig the other day, and have had all kinds of BSOD's probably related to this memory. Here are my specs.
Athlon 64 3200+
Gigabyte GA-K8N Pro motherboard
1 gig (2x512) OCZ PC-3200 EL Platinum Edition memory
Sapphire ATI Radeon 9800 Pro 128
2 WD 37Gb Raptors in RAID 0
Sparkle 530W PS
When installing Win XP, i would get this blue screen error
*** STOP: 0x0000007F (0x0000000D, 0x00000000, 0x00000000, 0x00000000)
I upped the DDR Voltage by 0.2V and ran memtest and they checked out, but still the same error during XP install.
So i removed one of the mem modules and it has run fine ever since.
Question is, should I put the other module back in now that the computer is totally set up and see what happens? Should i up the voltage 0.3V? While waiting for a response, i'm going to run the removed module in the computer and run a memtest and XP...
Athlon 64 3200+
Gigabyte GA-K8N Pro motherboard
1 gig (2x512) OCZ PC-3200 EL Platinum Edition memory
Sapphire ATI Radeon 9800 Pro 128
2 WD 37Gb Raptors in RAID 0
Sparkle 530W PS
When installing Win XP, i would get this blue screen error
*** STOP: 0x0000007F (0x0000000D, 0x00000000, 0x00000000, 0x00000000)
I upped the DDR Voltage by 0.2V and ran memtest and they checked out, but still the same error during XP install.
So i removed one of the mem modules and it has run fine ever since.
Question is, should I put the other module back in now that the computer is totally set up and see what happens? Should i up the voltage 0.3V? While waiting for a response, i'm going to run the removed module in the computer and run a memtest and XP...