What is my fsb?

[xMercuryx]

I have an AMD 1.33 ghz processor and i want to know how i could find out my fsb? I am still a newb when is comes to this stuff, so I hope someone can help me.

[FRANK]

Welcome to the forums.

The FSB of the 1.33 is 133MHz (doubled to 266), with the multiplier being 10X. That would be a "C" code chip
Check out this attatchment (Sorry, a little hard to read at 400 X 400, there are some better images out there)

[bloodywolf]

I tried the setting that the other poster left u but they don't seem to work. I set the Mhz to 133 and set the multiplyer to 10 but the when i boot the monitor will not work. Dont know enough about it to know if it is locked or not. Seem to be rnning about the same equipment as you are amd 1.33 thunderbird asus a7v33 512 meg sdram think i have a voodoo board burner3 40gig hardrives.etc.

[FRANK]

First of all, Welcome to the forums.

Do you have the A7V motherboard with the KT133 chipset or the A7V133 with the KT133A chipset? if you have the A7V you are going to be limited by that KT133 chipset that generally limits the FSB to the 107/110MHz range.

[bloodywolf]

I am reading the manual right now all I can give u right now is that it is an Asus A7V Jumperfree Pc133/VC133 200 mhz Fsb AgpPro/4x Socket A Motherboard

[bloodywolf]

via vt8363 (via apollo kt133 system controler
Via Vt82C686A PCIset

[Hugo 59]

Originally posted by bloodywolf
via vt8363 (via apollo kt133 system controler
Via Vt82C686A PCIset

This chipset will not go above about 110 fsb or there abouts. In order to run your chip at 1.3 you will have to set it at 13 x 100 or a similair type setting.

In order to run your chip at its rated setting you will need a new mobo. The asus A7V133 with the kt 133a and via VT82C686B is what you need.