2600 mobile

Just wondering what you guys are getting with your 2600 mobile's I have mine at 11.5 x 215 @ 1.75 volts at the moment stepping is IQYHA0346TPMW i had Problems going over 205 FSB till I did the L12 mod to 166 was think about changing it to 200 to see if it works better I have had it up to 2500MHz but at 12.5 x 200 but I am trying go with a higher FSB

Something that might help is using TicTacs modded BIOS...helped me get up to 220...220 seems to be the limit for most newer NF7's...

D23 3D-FIRE

D23 SUB-ZER0

(the D23 sub-zero works better for mine)

215x12. I know there is more FSB in it, I just need to find the time to get it. I am using the newest Abit bios. When I built it I didnt know to check the stepping. Yep I am a newb.

I'm using TicTac's d23 Subzero as well, with SATA bios 4227.

It is just plain awesome on my board. I've been stable up to 238 fsb with only 1.5vdd. That is where my ram craps, so no higher for now

xxxcobra, I think you should sell me that chip

I'm running my 2600 mobile at 250x10.5=2631mhz right now,well I'm in the second hour of primeing so far so good.