wa-hoo!!!

2400 MHZ, 200X12, 1.725 Vcore


on my new barton 2500!!!!


weeeee!

ok, i lied....

2405.46 mhz

lol. now go for 2.5

Nice work, what sort of cooling are you using?

watercooled.... my own spiral copper waterblock, junked heatercore, pond pump, 2 liter res.

yeah, i can't boot at 12.5x200 or at 12x205

looks like i'm stuck....

chip seems unresponsive at anything higher than vcore 1.75

my old tbredA took a 2.03 vcore, and got over 2 ghz

nice overclock here what is your temp???

Pump more voltage through it. Hit the switch and go Dr. Frankenstien on it's ***!

Have you tryed upin the FSB?

What RAM are you using?

Good Job.


Now get back to work on it!

cpu socket temp is 23 degrees celsius.

vcore is 1.8v

water temp is 19.9

room temp is 17.3

fsb does not go up to 204 mhz, even at 1.9vcore.

can't get 12.5 multi, even at 1.9 vcore.


i've overclocked a pally, and a tbreda, and this was definately the most fun!

oops, forgot the ram...


i'm using some corsair xms, 1 stick of 512, got it in summer of 2003, rated at 166 mhz, 2.0 cas.


i run it at 166 mhz, 2.0 cas.

i can't run it at 200 mhz, even at 2.5 or 3.0 cas.

so i just keep the latency down and suffer the asonchronous momory speed, until i can get enough paypal funds to buy two sticks of 200mhz, low latency.

also, mobo is asus a7n8x-x with nforce2 ultra 400.


looks like my next project is to do a vcore volt mod on that bad boy, and maybe hook up some 5v direct to the mosfets. maybe it's 3.3v? i better find out before i go dr. frankestein on it's arse.


also, increasing vddr doesn't do a thing for the memory. oops.