• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

Centon memory

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

batharoy

Member
Joined
Apr 24, 2003
Location
Spokane, WA
I got 2 sticks of this from CompUSA
(35$ after rebate) the first 2 sticks both
had errors with MEMtest 86, using asian chips
Took both back and got new sticks both sticks with MADE in USA
on the sticker.
The chips have the following lines:
Line 1: CE
Line 2: 32M8D333<---I assume 32meg per chip 8 chips per module 333mhz speed
Line 3: 0351NUNM <--- don't know

Anybody know anything about these chips?
Are they any good?
Should I trash them and get new memory?
 
The 0351 is most likely date of manufacture, No idea about the NUNM part but I would guees that they are rebranded chips by centon due to the CE in in line 1. I have no idea if they are good or not might as well try em out. Prolly won't do much better than ddr333 though.
 
the CC near my house had the centon memory with Winbond CH-5's. They also had some other crap brand so you should look around, you might get lucky.
 
Thanks for the link speed but I didn't get a match.

I had the timings set at 2.5-3-3-7 and havn't had any problems at all so I reset to 2-3-3-7 and got a error with Prime 95 within
3 min of runtime.

So now its back at 2.5-3-3-7 with a FSB of 180 at 333mhz.
 
Back