Just got some Kingston KHX3000K2/1G from Kingston Direct shop with their recent special price of $195 for a gig (two 512meg sticks). This stuff will do 210FSB @ 2-2-2-11 @2.9v with no errors in Memtest but at 215FSB I get errors on test 5 (about 32 errors per pass). My setup gets flakey after 216 FSB with tight timings and using a set of Kingston PC3200 that I know are BH-5 from looking at the chips. I pulled the spreaders off the new Kingston PC3000 and the chips were remarked Kingston with the following numbers V55446 (or V55322) 0304 P01 D328DW-45. I know that remarked D328DW-45 chips could be either Winbond CH-5 or BH-5. My motherboard will not put out more than 2.9v to the ram to see if more voltage would determine what I have. From the above clues can someone tell if I have gotten CH-5 or BH-5?