XP-M 2600+ from Newegg

r4fo

Member

​

Joined

Mar 18, 2004

Location

Asuncion - PY

• Apr 29, 2004

• #1

I just receiced my XP-M from newegg with this stepping:
IQZFA 0347XPMW
I haven't seen this stepping much in the forums...any opinions?

 

M

majestik

Registered

​

Joined

Apr 24, 2004

• Apr 29, 2004

• #2

Yup, I have it. You're the only one I've seen. Seems its the only one Newegg has now. Im still messing with it. I got it to 2540mhz on air (Zalman 7000A-CU) with 1.84-9 voltage and 12x211. Though it was too hot. So now I'm at 2400mhz with 1.71v at 12x200. My memory is a limmiting factor though - still working with it. Im a newb - so maybe I'll get it to 2.5 again stable and cool soon.


Good luck

 

tcat92

Registered

​

Joined

Apr 29, 2004

Location

Wash. D.C.

• Apr 29, 2004

• #3

I got a 2600 mobile from newegg last week. It is the IQZFA stepping. I got it to 2.2 (200 x 11 @ 1.575 @ 40C) and Prime95 stable for 6 hours. My first overclock. I'll be testing to see how far it can go and post the results so we can get better stats on this stepping.


___________________________________
ANTEC SONATA True 380W PSU
ABIT NF7-S Rev. 2
Mobile XP 2600+ 512K IQZFA (2G [email protected])
Geil Value Series 2 X 512MB 3200
Tr2tt (Thermaltake) Tr2M1 || Arctic Silver 5
SAPPHIRE ATI RADEON 9800 PRO 128MB
SAMSUNG 80GB 7200RPM IDE 2MB
Samsung 52X32X52X16 DVD/CD-RW

 

OP

r4fo

Member

​

Joined

Mar 18, 2004

Location

Asuncion - PY

• Apr 29, 2004

• Thread Starter
• #4

Setting up my system now.. i will do some testing and post results later...
Finally..some CPU's with the same stepping...

 

georgelogy

Member

​

Joined

May 24, 2002

Location

CA

• May 3, 2004

• #5

I just got the IQZFA 0347XPMW also. I can't wait to check it out this week.

 

Sterculus

Member

​

Joined

Dec 18, 2002

Location

Seattle

• May 3, 2004

• #6

First of all, r4fo, majestik, and tcat92,
WELCOME TO THE FORUMS!
Anyways, good luck with the overclock, let us know how it goes once you get the system set up.

 

2

2coop

Registered

​

Joined

Jan 4, 2004

Location

phxusa

• May 3, 2004

• #7

Yes welcome and follow up on your progress with these. Information on new and different steppings is much appreceiated for those who are looking to buy. The availability of certain ones does not seem to last long and having timely data is a little hard to get. good luck!

 

wicked-one

Member

​

Joined

Jan 19, 2004

• May 3, 2004

• #8

Definitely is not much info on the IQZFA's. They may or may not do a little worse than the IQYFA's. Haven't seen enough of them to tell for sure though. "I" stepping though, so should do very well no matter what.

 

M

majestik

Registered

​

Joined

Apr 24, 2004

• May 3, 2004

• #9

Im running mine at 2.4ghz with 1.66v core (MB overvolts some). 12x200 for now. I had some nice mushkin ram but it appears one of the chips is bad causing instability. Using old ram and works great but memory is unstable since im running it at a 5/6 ratio at 166 (PC2700 1 gig generic). Games just crash after some short play and Prime gives me a rounding error because of the mem (tested one good stick and very stable).
Anyways...still messing with it....and about to RMA my PC3500 to Newegg. Once I get some new chips I'll run it normally and crank it up to 2.5 (which I had it at for some time but memory was unstable still).

Blah...its a mess Great chip though - bad memory hehe.

Will post with results afterwards.

Other info in my sig.

 

georgelogy

Member

​

Joined

May 24, 2002

Location

CA

• May 5, 2004

• #10

Just got my IQZFA 0347XPMW in today, and right now I'm currently priming it at 2.3GHz at 1.55v. Seems very stable and very, very cooooool

Edit: 2.4GHz @ 1.625

 

Last edited: May 5, 2004

OP

r4fo

Member

​

Joined

Mar 18, 2004

Location

Asuncion - PY

• May 8, 2004

• Thread Starter
• #11

Running at 2.4 Ghz @ 1.62v i'm getting some memory errors due to the cheap memory.

 

georgelogy

Member

​

Joined

May 24, 2002

Location

CA

• May 8, 2004

• #12

This seems like a pretty good week and stepping so far.

Currently 2500 at 1.75.

 

M

mcoleg

Member

​

Joined

Feb 2, 2004

• May 8, 2004

• #13

how far would it go?

 

S

shaz

Registered

​

Joined

Mar 5, 2004

Location

l.a. cali

• May 9, 2004

• #14

bought mine few months back but
never gave a report i think
from newwgg...

super barton
IQYHA 0348 SPMW
AXMG 2600 FQQ4C

2.2ghz 11x200 vc1.45 chip1.6 primed 12hours good (current clock)

2.4ghz 12x200 vc1.625 primed 1hour good

2.5ghz 12.5x200 vc1.7 primed 1hour good

2.57ghz 11.5x223 vc1.8 chip1.7 primed 2.5hours good

2.6ghz 13x200 vc1.8 primed 6hours good

2.6ghz 12x217 vc1.825 primed good 12.5hours good

2.65ghz 12x220 vc1.9 primed 14hours good

2.7ghz 13.5x200 vc1.96 primed 12hours good (but failed 3dmark)
temps too toasty at this clock on air at 53 degress load(mbm)
and is where i stoped

vc settings from motherboad bios
abit undervolts abit

all testing done on...
abit nf7 bios 18 (stock)
with bh-5 3500 single channel
slk-900 80mm tornado lowest rpm speed controled with 550w true control

iam very happy with this chip
and thanks to this forum on the heads up

paul

 

M

mcoleg

Member

​

Joined

Feb 2, 2004

• May 9, 2004

• #15

2.65ghz @ 1.9v, that's not too shabby, nice chip man

 

S

shaz

Registered

​

Joined

Mar 5, 2004

Location

l.a. cali

• May 9, 2004

• #16

nod nod

bios vc1.9 = mbm vc1.85ish
which prob be my max togo on air
nice
bet these new chips get about the same milage
or even better
think i bought mine bout 4 months ago

 

unreal

Registered

​

Joined

Jul 18, 2003

Location

miami

• May 9, 2004

• #17

yes, welcome to the forums, seems newegg is putting these out i may go and get one for myself,.

 

tcat92

Registered

​

Joined

Apr 29, 2004

Location

Wash. D.C.

• Jun 3, 2004

• #18

Ok, the best oc I got is this:

2.45 (204 x 12) 1.775 vcor 2.7 vdimm 9-4-4-3. I think the memory timing can be tightened. But I was able to run it P95 for 14 hours at priority 10. I don't think this stepping is the best. I think the only way to get to 2.6 gig is to up the vcore to 1.85 based on my cursory experiments.