• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

The "L" Word.

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
L1: Allows motherboard control of boot multiplier
L2: Not entirely sure ... probably the same as a Palomino (ie: L2 cache size control).
L3, L4: Tells the CPU what multiplier to use (linked to L1)
L5: SMP control (joined = SMP capable)
L6: Tells the motherboard what multiplier the CPU has (distinct from L1, L3, L4 setup)
L7: Voltage

So successfully change the multiplier for a board that does not support multiplier changes, you usually need to modify both the L6 and L3/4 bridges (or do the L6 and L1 and pinmod)
 
Is there a site around that gives a list of L mods i can make to a duron to up its vcore or specific multiplier? my board doesnt allow for these changes.
 
thanks man. im going to review that and see what i can turn up. my duron 1100 comes at 1.8 volts, i think i can probably get 1.3 out of it with that if ic an fiddle with these bridges.
 
Back