PDA

View Full Version : How hot?


Scottyb
08-13-01, 11:01 PM
How hot should I let my 1.2 Ghz cpu get?
At 1.2 and 1.266 GHZ it runs at 60 deg. C
At 1.0 GHZ t runs ar 55 deg. C
These temps are after use

train22
08-13-01, 11:10 PM
I am not sure about this but this is pretty high, I'd get some better cooling, what case cooling and cpu cooling do you have?
65 isn't terrible but I would always keep it around 50

Scottyb
08-13-01, 11:19 PM
I am using an Enlight 7237 Mid ATX w a sparkle 400 PS. I have a Tai-Sol CEK733092 Socket A Cooling Fan and a system cooling fan for my case.

hooziewhatsit
08-14-01, 12:34 AM
Do you only have one fan in your case?
If so, you might want to buy another. In general, the best results happen when you get a windtunnel going through your case. A fan on the front bottom sucking cool in, and another in the top rear exhausting the hot air.

Fink
08-14-01, 03:38 AM
Nutz, my 1.0 GHz would not run at 1.2 GHz over 52C!

Sounds like you need more airflow through the case, do as hooziewhatsit suggests and add more case cooling. Try pulling the sidecover off and see if your temps drop; if they do then you need to re-evaluate your case cooling.

TranceBear
08-14-01, 01:34 PM
Originally posted by Fink
Nutz, my 1.0 GHz would not run at 1.2 GHz over 52C!

Sounds like you need more airflow through the case, do as hooziewhatsit suggests and add more case cooling. Try pulling the sidecover off and see if your temps drop; if they do then you need to re-evaluate your case cooling.


I concour, anything over 45c idle is risking having an AMD keychain