Do i need to raise my Vcore???

[dborden]

AMD 1.4mhz, Asus A7M266, Corsair 256 MEG DDR PC2400 RAM rated at 300mhz/150mhz CAS 2, Millenium Glaciator HS/F, Arctic II

All I want to do is raise the Bus speed to 150 Mhz or as high as possible. I cannot change the clock multiplier with this MB. Do I need to raise any voltages when raising the bus speed?

[Coolio]

i don't think you need to raise any voltages until you begin experiencing unstability like windows won't load etc.

[chawken]

Originally posted by dborden
AMD 1.4mhz, Asus A7M266, Corsair 256 MEG DDR PC2400 RAM rated at 300mhz/150mhz CAS 2, Millenium Glaciator HS/F, Arctic II

All I want to do is raise the Bus speed to 150 Mhz or as high as possible. I cannot change the clock multiplier with this MB. Do I need to raise any voltages when raising the bus speed?

Pushing the fsb up to 150 will require you to raise the voltage - probably about to 1.8 to 1.825v. Start at 1.8, if system is stable then leave it, if not go up to 1.825v. You should be able to get that 1.4 up to 1.6+