I saw in another thread
What is the correct way of doing this?
that there are some good few-liners to describe how to overclocking CPU, FSB, motherboards, ....
So, if you have some few-liners, (maybe poems, songs, ....) to summarize or describe, as complete as possible, how to overclock existing and future systems, for both newbies and experienced techies, please post.
Preferably limit to 10 lines in a regular thread layout.
Eventually, we may vote for the best one or few.
What is the correct way of doing this?
that there are some good few-liners to describe how to overclocking CPU, FSB, motherboards, ....
Steven4563 said:lower the multiplier to around 5 then crank up the fab once it becomes unstable and your still around stock clocks up the Chipset voltage and the Ram then once u found max fsb up that multiplier
Silent Buddha said:You will have to up the Vdimm to achieve faster than SPD timings like 2.5-2-2-5. Even with the SPD of like 3-2-3-8 (I think that's accurate), you will eventually have to up the Vdimm to get higher FSB that you are looking for.
My approach to oc'ing:
1. Burn-in cpu by running low multi x relatively high FSB near stock clock speed with Prime95 small ftts.
2. Use MemTest or Prime95 Blend test to see how far your memory can go with your max Vdimm.
3. Lower multi to like 5x and up FSB as much as I can stable with as little Vcore as possible.
4. Up multi to like 9x and start going up by .5x each time, testing for stability. Add Vcore when unstable.
So, if you have some few-liners, (maybe poems, songs, ....) to summarize or describe, as complete as possible, how to overclock existing and future systems, for both newbies and experienced techies, please post.
Preferably limit to 10 lines in a regular thread layout.
Eventually, we may vote for the best one or few.
Last edited: