1st Overclock!

[Wahoogie]

WOW! After a few hours of cursing, I realized that my A7V wouldn't let me change the multiplyer through the BIOS....So I dove for the Dipswitches and changed my 9x multiplyer to 9.5.

So at 100x9.5 I got 953! Yes!

But that wasn't enough... I bumped the FSB up to 102....got 969!

Then I decided to go all gung-ho and put the fsb at 111....I'm now running stable at 1054.7MHz!!! Keep in mind I have only had enough time to do this in about 45 minutes....so Tomorrow is a whole other story!!

I'll post a pic in the morning!

My old 3dMark2k1 Score was around 2800, now is at over 3k @ 969....so I need to do it at 1.05 tomorrow!

[Hugo 59]

I feel for you my friend for I fear you have caught the addiction!

I can hear it now. Hi my name is Wahoogie and I'm an overclocker.:D

Btw Congrats on our first oc let just see how high you can push that baby! Just keep an eye on those temps.

[Wahoogie]

Well, I take it back, 1.05 was NOT stable really. Should I increase my Vcore? Every time I have done this it wouldn't post.

My newest 3dMark2k1 score is 3153 running@1007.

Back down to 106x9.5

[train22]

Isn't ur ram kinda slow for o/c??

[Wahoogie]

Well it's just about the best SDRAM I can get....Unless I got a DDR Mobo, I'm stuck with this.

[Hugo 59]

That is great ram for oc'ing I've run mine upto 155 fsb at all the fastest settings. the kt133 mobos are known to not be able to take a very high fsb overclock I would try ten by 100 then oc the fsb in one mhz increaments till it be comes unstable then take it down a notch up the voltage and keep going till you cant go no more. Just make sure you keep and eye on those temps

[Wahoogie]

My voltage is at stock 1.5 right now. I'll try putting it at 10*100 and upping from there.

[Tomas]

Originally posted by Wahoogie
My voltage is at stock 1.5 right now. I'll try putting it at 10*100 and upping from there.

Isnt the tbird core voltage 1.75 at default?? and 1.65 on durons

[Wahoogie]

You're right... 1.75