- Joined
- May 8, 2004
- Location
- Boston
Ok,
I got an AMD 2700+ (Non-mobil) Not sure if it's barton or whatever. The max FSB for the chip is 333 MHz. I also have a Asus A7N8X-D MB, this chip is "Mating" with (PCB Version 1.04-ish). My RAM is Corsair-3200, DDR, Dual Channel, with heatspreaders etc.
I would like to set the FSB to 200 and the multiplier to 11 to get 2200. Can I do this with the above mentioned equipment and maintain stability??? When I go to 1.75 my CPU temp skyrockets to 74 Degr. (and above if I don't reset before this point) with a volcano 7 @ 3400RPM (I could go higher but I like my delicate hearing)
It is currently set at 166 x 13 =2158 MHz with the VCore set to 1.65 and it runs well, but I want MORE DAMNIT!!!! Thats what I bought this expensive friggen' RAM for.
I have tried to set the FSB to 200, at many different multiplier- and voltage settings and some seem to be stable, but I if try to play some 3d games they slow to a crawl. (I have a good Vid Card) Has anyone had issues like this???
There are also other settings in my BIOS for Video card Voltages and Memory Voltages, can you tell me what these are and if I should bother changing them???
Lots of questions! But... I'm sure you guys are more than qualified to handle them. Please give me any advise or personal experiences that might help.
Thanks!
I got an AMD 2700+ (Non-mobil) Not sure if it's barton or whatever. The max FSB for the chip is 333 MHz. I also have a Asus A7N8X-D MB, this chip is "Mating" with (PCB Version 1.04-ish). My RAM is Corsair-3200, DDR, Dual Channel, with heatspreaders etc.
I would like to set the FSB to 200 and the multiplier to 11 to get 2200. Can I do this with the above mentioned equipment and maintain stability??? When I go to 1.75 my CPU temp skyrockets to 74 Degr. (and above if I don't reset before this point) with a volcano 7 @ 3400RPM (I could go higher but I like my delicate hearing)
It is currently set at 166 x 13 =2158 MHz with the VCore set to 1.65 and it runs well, but I want MORE DAMNIT!!!! Thats what I bought this expensive friggen' RAM for.
I have tried to set the FSB to 200, at many different multiplier- and voltage settings and some seem to be stable, but I if try to play some 3d games they slow to a crawl. (I have a good Vid Card) Has anyone had issues like this???
There are also other settings in my BIOS for Video card Voltages and Memory Voltages, can you tell me what these are and if I should bother changing them???
Lots of questions! But... I'm sure you guys are more than qualified to handle them. Please give me any advise or personal experiences that might help.
Thanks!