- Joined
- May 19, 2004
- Location
- Sweden Gothenborg
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
Interpreting the graph...
- Thread starter sam820921
- Start date
- Joined
- Mar 11, 2003
It tells you how well they performed, and how restrictive they are at 1gpm. That's a fairly average flow rate for watercooling system, so you want the waterblock with the lowest c/w.
- Joined
- May 18, 2004
- Location
- Bowling Green, OH
Your looking for low c/w and low resistance. For example the DD RBX is good because it has low c/w and low flow resistance. And the swiftech 6000 has a low c/w (good) but high flow resistance/pressure drop (bad unless you have a good pump).
OP
- Joined
- May 19, 2004
- Location
- Sweden Gothenborg
- Thread Starter
- #4
Aha got it.... cheers
But if you have a strong pump(or a very strong
) then it is necessary to have a strong resistance ... right???
But if you have a strong pump(or a very strong
) then it is necessary to have a strong resistance ... right???- Joined
- Apr 23, 2004
its not neccessary, just able to handle it, so if it has low c/w, then go with it
9mmCensor
Disabled
- Joined
- Oct 23, 2003
- Location
- Banned Camp
Welcome to the forum.
