anyone used a ...

[thorilan]

http://overclockers.com/tips1031/2-531.jpg

this is the ford econoline HC and i was wondering if anyone has personaly seen or modded one of these. some time in the furute i have an idea for a specific case that if this is modified might fit perfectly but due to the fact that i live in japan and dont have any of my tools here i might have to have someone mod and send it to me.

[thorilan]

Bump

[JFettig]

hey, yeah I saw that a while back and was curious about it. I beleve those numbers are for the cooling area, so your looking at like 22.5" long total.


Jon

[thorilan]

the thing is if i shoten it the width might just perfectly fit inside a wavemaster case and it would make a good single pass very high flow self bleeding coreif i can get it short enough to fit under the 5.25 bays

[thorilan]

i could even get 2 of them shortened and make a 6 fan sandwich ( those fans are 80mm so there should be enough room )
the middle fan set could actualy be full power and a higher cmf fan set . it also wouldnt be to hard to add sound dampening.
im aiming at a pretty high flow idea ( hence the 2 single pass rads) with a t line and possibly some copper tubing to make tighter turns in between the double rads

[sandman001]

Just throw a BIX or similar in the top.