What timings for OCZ EB PC3500...

[zexmarquies01]

Ok, I just got my new DFI-LanParty B motherboard.
and one stick of OCZ EB PC3500.

I want to TRY to hit around 240 FSB.

just wondering, what would be the best timings to hit that? also, with this board, i can go up to 3.3V dimm.

so what would be the best timings and voltage to hit 240?

[wannaoc]

Well first off try the stock 2.5,3,2,8 with 2.8v, maybe 2.9v, then go to 3.0v when needed. Check that to see how high you can go and chances are it will do pretty good. After that or right from the start if you like you can try 2.5,2,2,8. Alot of people with the 3500/3700 EB are able to get those timings at very high speeds with 3.0V. Going over 3.0v isn't covered by the warranty and I've only seen a few do it and then only for a very short time with a fan blowing directly on the sticks. Good luck.

[mrspec3]

3-2-2-9 seems to be the best.
Look here for some more good info
http://www.dslreports.com/forum/remark,10058764~mode=flat?

Steve