- Joined
- Oct 20, 2003
- Location
- MTU
I recently put together my watercooling for my computer. It includes a Whitewater CPU block, a Maze 4 Chipset block and a Maze 4 GPU block. I got everything into the case after leaktesting and bleading and attached to the mobo. I then put in all the peripherals, hdd cd and whatnot. I hooked up the relay and tested it to make sure it worked. Well I went to boot the computer and the fans spin for about a second then stop. I then tried using the reset switch by moving the connector on the mobo thinking a switch was bad. Still same problem. I have to switch the powersupply off each time I try to boot again. I tried unhooking individual hdd's. I tried taking out 1 stick of RAM, then both. I even cleared the BIOS. I am totally stumped on what could be wrong. I would appreciate all the help you can give