how far can i push the vcore

[KnifeBoy]

i was wondering if i could bump the vcore volt to 1.95(1.85) now.

t-bird 1.4@1.52
epox 8kha
256 mb of 2100 ram
300w psu

[train22]

yes, you'll have to refer to the guides, they will tell you how, you have to mess around with the mobo hardware.

[SickBoy]

What HSF unit do you have? You really need to have a good one to push beyond 1.85 volts vcore. (Glaciator, SK6, MC462A).

Your case cooling should be good as well, I'd say at least 40 CFM each of intake and exhaust, maybe a good blowhole too.

SickBoy

[KnifeBoy]

i have a titan ttc mt1ab on my t-bird, current cpu temp- 28c - 32c

have 5 fans mounted on the case

[FRANK]

You should be fine at the maximum setting of most boards (1.85v, often reported as 1.92v), provided you have adequate cooling. You will need something more than the factory hsf in my opinion. Keep in mind, increased voltage equals increased temperatures.