mushkin 222

[rcillig]

I got a 1 gig2(512's) mushkin 222 and cant seem to get the 222 timming setting when overclocked @ 2.5(228*11) How far can I raise the voltage and still be sure Im not gonna fry my ram. Ive set my ram to trubo setting in my bios and cant only get :

@ 3.2 volts I got 2.5-3-2-6

is there another way to check my ram rimmings or change them ?

[ZachM]

There should be an option where the turbo setting was called user, advanced, expert, ect. I don't know DFI boards. That will let you change the timings individually. Don't be afraid to crank the voltage up. 3.3v is supposed to be ok for every day use on that RAM. At 3.2v you should be able to use the 2-2-2-6/11 timings with the RAM overclocked no problem.

[rcillig]

ya there is a option in the bios like that but it dont let me change the setting it does it for me..... but ill reboot and check agian. I also pushed it to 3.3 but still got the 2.5-3-2-6 timming

[rcillig]

yo you da man... I just been overlooking that.. changed it and there it is 2-2-2-11 awsome thanks bud.

[rcillig]

Ok now here a question for ya, why can i run 2-2-2-6 with out error but when I try out 2-2-2-11 I get errors ? I see so many with the mushkin 3200 running it. I got the volt's set @ 3.3.

[rcillig]

update I cant get it to run at 2-2-2-6 with out error either, I got games freezing and comp slow responce.

@ 2-2-2-6 volt's 3.3

but at below runs great fast responce and no game lockups...

@ 2.5-3-2-6 volt's 3.3

why be this ? any ideas ?


maybe I got something in the bios changed wrong ?

I changed it too 2-3-2-6 in bios but when I bootup it still reads 2-2-2-6 with cpu-z
why ?

[FDM]

is CPC disabled?

[rcillig]

got me ill check.. is it saposed to be ? and what does it do ?

[FDM]

if its on try turning it off. With double sided mem sticks it usually helps turning it off.

[rcillig]

It was on so Ill try it off..... hope it helps..

[rcillig]

that seems to of helped bo crashes so far...