PSU Advice

[]V[]rs[]V[]ith · Jul 11, 2004

I plan on going TEC fairly soon, and was wondering if this be a good powersupply for a 226 watt pelt (swiftech MCW5002-AT), and, well, for that matter, is that waterblock/pelt any good? I am fairly sure i am going to use a '77 Bonneville heater core and I might add a gpu pelt as well.

-s[]V[]ith

magick_man · Jul 12, 2004

for the psu it should work just fine with 36a on the +12v rail
the 226 watt tec pulls 20-22a at 12v so you could use that to power the 226 and an 80 or possibly 120 watt pelt for the gpu
as for the quality of the waterblock i have no idea about that stuff
hope that helps

~Magick_Man~

squeakygeek · Jul 28, 2004

You could also use a Sparkle FSP-550. I use one and it works fine powering both a 226 watt pelt and my whole system at the same time.

echow87 · Jul 28, 2004

yup, that psu should work fine with the 226w pelt.

crimedog · Jul 28, 2004

http://www.sidewindercomputers.com/samam32inpsu.html

PSU Advice

[]V[]rs[]V[]ith

Registered

magick_man

Forum Magician

squeakygeek

Member

echow87

Registered

crimedog

Member

Similar threads