Let the O/Cing begin!

[Bobby Manus]

Last night I lapped my heatsink real good and did a good application of artic silver II, my temps are good and its time to see waht this AYHJA Y can do mwahaha. Running stable at 1.5 (133*11.5) havent gone over 42c. Im going to try 133*12.5 and pray that it boots.

[Bobby Manus]

Had to up the voltage from 1.75 to 1.8 but im running clean at 1.6ghz, btw I am not at 12.5 multiplyer like I said. Turns out my mobo once it gets to the multiplyer of 12 it only allows multiplyer increments of 1, not .5, so it gots 11.5, 12, 12.5, 13, 14, 15 and so on. That means my nex step is 1733mhz, wooh doogy :D

[jeff_harrison_344]

That is a very nice O/C indeed, keep on goin till ya cant go anymore!!!

[KFB]

Bobby M - nice oc. let us know what you top out at

[Bobby Manus]

Ok here are the updates, peaked at 1600mhz with 133mhz fsb, with 150mhz fsb i could get 1575. I also got no more mhz when uping the coltage from 1.75 to 1.8, but uping from 1.75 gave me a while multiplyer increment. I am going to attempt a burn in sometime later today and maybe tomarow I will keep you updated.

[KFB]

maybe a voltmod would get you higher mhz, so long as you can cool the cpu enuff. i am going to have to get a 1.4 for my 8kha b/c the duron just doesn't do it justice. epox rulez!

[Bobby Manus]

This bad boy is runing 160mhz fsb, no USB though so I cant keep it that high. Hooked up my PS/2 mouse for now but I think I will have to stick with multiplyer overclocking. Temps are not an issue during all that I never went over 47 degress c on purly air cooling so I am impressed with that.