My 1st watercooled rig

I am waiting on the case and i could not wait so i put the system together. i need to cut the holes for the 120 fans.

anyway here is the system



i am getting 31C at idle and 36C full load..


well i have a question.. sort of.. its a P4 3.0Ghz 1gb of kingston PC4000 DDR and a asus P4C800 i cant seem to get it over 3.600GHz i messed with the voltage but i only took it to 1.6 when i did that it would reboot during 3d2001 for the stress test. anyone have any tips to get this sucker higher?? thanks

You should be fine bumping your vcore to 1.65 or 1.675, but after that you're entering the grey-zone for P4's. Your memory timings and GAT/PAT settings could also be a limiting factor here.

Btw, your sig is way, waaayy over the limit

mine is at 3.6 with 1.625vcore, try that or 1.65 if that doesn't work

i can hold 3.6 with defult core rock solid stable. thanks for the input man

3.0E at 3.6 on stock vcore as well.