My Celeron 600 @ 1098 and rising

[Sohryu Asuka Langley]

Weird, since i could never get 1071Mhz to complete the POST routine. right now I'm idling at 29C, I've just run SANDRA CPU and Mem socre (didnt upload because I forget to reset the RAM CAS timing), theres a WCPUID pic here, and Photoshop and CuteFTP havent had a problem. I'll restart and try again on another FSB.

http://iow.free.fr/oc/wcpuid.gif

UPDATE: Loaded Windows at 1107Mhz, rebooted and tried 1116Mhz where I had a Protection error. Rebooted back to 1062, found video to be stuffed (also a bunch of Press Any Key to Continue prompts), rebooted (now running) back to 900Mhz to reinstall and run some Disk diagnostics.

[CrystalMethod]

Holy !(&#*@$&!)@&$!) !!!! Nice OC!!!
so many questions...
How stable is it? Have you tried looping 3dmark yet? Math mark? etc...
Keep us posted!

[Sohryu Asuka Langley]

Well at 1098Mhz Photoshop and CuteFTP were fine (WCPUID pic and upload). Im sitting at 900Mhz right now so I can run ScanDisk and Defrag. If I run these at a non Standard DMA bus then I end up with even more errors. (Cheap 15Gb 5400RPM Seagate....yeah...Seagate...)

[Mr B]

I see stuff like this and it makes me want to go out and get a 2nd slotket for mine!!

I got my C600 to 1053 running on a Soyo 6BA+III. I've got an Abit BE6 II due in the mail, and I've got a feeling I might squeeze a couple more MHz out of the C600 on that board.

My P/// 700E lives in my slocket right now. I've got it running, oddly enough, on that same Soyo right now, at 994MHz. I've yet to really run it thru the gauntlet, but it seems stable there thus far.

I'm hoping the BE6 II will let me get that last one MHz of FSB out of the 700E.... :D

Man, that's an awesome o/c you've got there. 1.1GHz from a C600 is really flyin'... Well done!!

Mr B

[Sohryu Asuka Langley]

Go for the 1Ghz family! You can do it!

UPDATE: Everyone's favourite, SANDRA!

http://iow.free.fr/oc/sandra1098.gif

UPDATE AGAIN: I bet I could get higher but all the stuff thats in my computer is required. If I could ditch half my hardware and get a new HD, I bet i could make at least the next few FSB settings no problem.

[Carmine_Paterno]

GREAT JOB!!!

Ill take you with my Celeron 266 (SLOT1) @ 430 2.3v LOLOL!!!

I can't wait to get my Celeron II 800......really squize it all out on my BF6. And just for fun, i might just go pickup a Celeron II 600....I miss my old lil baby.

[Sohryu Asuka Langley]

didnt you have a 700?

[Carmine_Paterno]

Yes, i had a Celeron II 700, and a Celeron II 600. I had a Celeron II 700 for a long time, but the 600 i only had for about 2 weeks. The 700 did 997 @ (LoL) 2.4v, and the 600 did 1ghz @ 2v.

[Rutger]

Hi, I´m realy new at this but you seem to know a lot about it. If you don´t mind I will explain my situation.

Celeron 600, 1 simm 128 MB (133Mhz), 1 simm 64 MB (100 Mhz). Motherboard (M754LMR) with sound and video onboard. I put 32 MB on the video. Jumpers are 133 mhz (frequency) and on 6.0 (multiplier). Basicly, my PC runs like slow mud!

Can you give me any tips, hints, solutions. like I said, I´m realy new at this.

THANX

[TUK101]

Originally posted by Rutger
Hi, I´m realy new at this but you seem to know a lot about it. If you don´t mind I will explain my situation.

Celeron 600, 1 simm 128 MB (133Mhz), 1 simm 64 MB (100 Mhz). Motherboard (M754LMR) with sound and video onboard. I put 32 MB on the video. Jumpers are 133 mhz (frequency) and on 6.0 (multiplier). Basicly, my PC runs like slow mud!

Can you give me any tips, hints, solutions. like I said, I´m realy new at this.

THANX You need to post this as a new thread. You probably need to start with defrag and then if that doesnt work get a quality video card.

[LutaWicasa]

Hey Sohryu Asuka Langley , congrats man! I love seeing our lil' Cellies just keep going and going and going.............. :D

[Sohryu Asuka Langley]

I killed it now :( Have a new celery but not as good :(