- Joined
- Jun 5, 2004
- Location
- End of the Redline
I've read alot of forum posts, etc where people seems to have problem with Abit IC7-MAX3 and higher FSB 240+. And (of course with my bad luck) I'm one of these users. So this point I will need all possible help what you can give to me, and I will update first post as much as I have sparetime. I'd be thankful if all IC7-MAX3 users would post here, and let me know next few things about their systems, cause I though pretty much this is system related problem some how.
Post following info:
PSU's Vendor & Model
Mobo's version, revision and bios ver. (eg. Abit IC7-MAX3 version 1.0 revision A2 with BIOS 1.6)
reg CPU info (default info, FPO#, packdate. Both of these can be founded on your cpu box)
Memory Stick(s) (Module vendor, chip vendor, reg voltage, latencies)
Graphic card's vendor and model
-
PSU:
Antec TruePower 550W
Motherboard:
Version 1.0, Revision A2, BIOS 1.6
CPU:
Intel Pentium4 Northwood 3.0C, L351B097, 03/06/04
Memory:
Infineon PC-2700 256Mb CL2.5, 2.5-3-3-7, 2.6V
Graphic Card:
Club3D Radeon 9700
-
What have you tried to solve the problem? Raising voltages, changing GAT-settings? Have you disabled or enabled something from BIOS and it helped to get through this? Have you tried different AGP/PCI -settings? All kind of information is needed, and I'd be thankful if you could give me some info so I could make somekind of comparsion of this.
Post following info:
PSU's Vendor & Model
Mobo's version, revision and bios ver. (eg. Abit IC7-MAX3 version 1.0 revision A2 with BIOS 1.6)
reg CPU info (default info, FPO#, packdate. Both of these can be founded on your cpu box)
Memory Stick(s) (Module vendor, chip vendor, reg voltage, latencies)
Graphic card's vendor and model
-
PSU:
Antec TruePower 550W
Motherboard:
Version 1.0, Revision A2, BIOS 1.6
CPU:
Intel Pentium4 Northwood 3.0C, L351B097, 03/06/04
Memory:
Infineon PC-2700 256Mb CL2.5, 2.5-3-3-7, 2.6V
Graphic Card:
Club3D Radeon 9700
-
What have you tried to solve the problem? Raising voltages, changing GAT-settings? Have you disabled or enabled something from BIOS and it helped to get through this? Have you tried different AGP/PCI -settings? All kind of information is needed, and I'd be thankful if you could give me some info so I could make somekind of comparsion of this.