- Joined
- Sep 5, 2002
- Location
- Boise, ID
Just wondering about where to put the barbs on the reservoir. The reservoir will be going in a box underneath the comp and it will have the pump connected to it so the barb that connects to the inlet of the pump will be at the side and level with the pump.
I am thinking about putting the fill and inlet barbs at the top of the reservoir but I am wondering if this will be a good idea or not. The reason I want the outlet at the top is because then the tubing can go directly down from the computer into the box at the bottom of the computer and into the reservoir (and straight is always better than having long bends and turns).
Now, the one thing I am thinking is that the water will be splashing in the reservoir unless it is filled all the way to the pump and I am wondering if this will be a bad thing or not.
I am thinking about putting the fill and inlet barbs at the top of the reservoir but I am wondering if this will be a good idea or not. The reason I want the outlet at the top is because then the tubing can go directly down from the computer into the box at the bottom of the computer and into the reservoir (and straight is always better than having long bends and turns).
Now, the one thing I am thinking is that the water will be splashing in the reservoir unless it is filled all the way to the pump and I am wondering if this will be a bad thing or not.