Awhile back I RMA my two sticks of ram-- OCZ sent me new matched pair of 512MB Module PN- OCZ400512R3 pc-3200 rev3---- I'm still getting the BSOD (stop 0x000050 error)
System specs
abit nf7-s 2.0 tic tac mod 3d fire bios cpc off (I have tried about 6 bios (same BSOD problem)
2500+moblie
480w thermaltake psu
2-512mb pc-3200 2.5 3 3 6 timings
1-80 gig hd
9200se ati video 800xt on order
2-cd roms
slk900a with 92mm tornado
I have tried running at stock settings- 166x11 200x10 200x11 200x12 220x10
All of which work for 1 hour to 36hours with prime 95 with out the BSOD
The BSOD comes anytime- playing game- or sitting idle.
So just for SAG's I threw in 2 sticks cheap 2100 memory and it has run fine for 3 days set at 5/4? 266mhz mem and 333mhz cpu (slow memory compared to OCZ) but stable
What could I possiably try next---- I have changed the timings to 2.5 3 3 11 and I got the same thing. Is there a different memory EB, Plat? that I should be using?
Or should I change the 5/4 4/3 divider- But I always hear it is bet to stay with the 1/1 6/6 ect.
What could the solution be?
Thanks
System specs
abit nf7-s 2.0 tic tac mod 3d fire bios cpc off (I have tried about 6 bios (same BSOD problem)
2500+moblie
480w thermaltake psu
2-512mb pc-3200 2.5 3 3 6 timings
1-80 gig hd
9200se ati video 800xt on order
2-cd roms
slk900a with 92mm tornado
I have tried running at stock settings- 166x11 200x10 200x11 200x12 220x10
All of which work for 1 hour to 36hours with prime 95 with out the BSOD
The BSOD comes anytime- playing game- or sitting idle.
So just for SAG's I threw in 2 sticks cheap 2100 memory and it has run fine for 3 days set at 5/4? 266mhz mem and 333mhz cpu (slow memory compared to OCZ) but stable
What could I possiably try next---- I have changed the timings to 2.5 3 3 11 and I got the same thing. Is there a different memory EB, Plat? that I should be using?
Or should I change the 5/4 4/3 divider- But I always hear it is bet to stay with the 1/1 6/6 ect.
What could the solution be?
Thanks
