How high will i be able to get my GF2 MX400 overclocked?

[Spleen]

Just got it today. It's at 200/200 running fine. I'd like to take the memory as high as possable.

Its an Inno3D Tornadao Geforce2 MX400. :cool:

What are your experiences with this card?

[It_The_Cow]

The only way to find out is to try it for yourself. All cards are different, and no two will overclock exactly the same. Increase its speed slowly, run a benchmark or two, and watch for artifacts. Once they appear, lower the settings 'til they're gone. If you really want to get the most, replace the heatsink and invest in some RAM sinks. Most people believe RAM sinks are pointless, but it can help to get a few more mhz.

[Bond_]

easy go get RivaTuner it's the most secure and easy way to overclocked your card without having any problems or risk...
Just don't forget your chip nicely cold... ;)
You can get rivatuner at www.tweakfiles.com

Good luck

[Da Whip]

Don't expect much w/ stock HSF, I could'nt get over 215/200 w/o artifacts w/ stock hsf. I replaced it w/ a Blue Orb, lapped and A/S of course, and was able to get 240/200.

http://www.insanehardware.com/showfile.php?i=7[/URL]

[DAppel]

I've got a Pine MX200. It's one of those really cheap MXs, with 7ns SDR ram. It only goes up to 175MHz (ram) before artifacts pop up.

But what I find rather strange is that yours GPU only gets up to 240. I can run mine at 270 with STOCK heatsink(lapped)+ a 486 fan on it.

Had it better ram chips, it would be a really blasting card.

270/175 sucks however...

[!-=sky=-!]

i used my friends inno3d geforce2mx and got it to run at 215/220 with stock hs/f and ramsinks

[Mr.Lansing]

I can get my ASUS V7100 Pro MX400 (32MB)
up to 240x240 no prob with original HS
i fink i mite be able to get more out of that card if i download otha programs cause the program that i used to tweak my Graphix Card is just the ASUS Tweak Ultility which came with the Card
my 3DMark 2001 scores just kinda good (3106) 1.2@1410 and graphix card @240x240

[The Overclocker]

forgett the blue orb, get a fop32 and cut off the bit that goes over the plastic bit of the socket, that is what i did, way better then the blue orb