MY L1 Brides have self-LOCKED again!!!???

[luismxc]

It was all running well; i had unlocked my computer 3 days ago, and had the multiplier clock to 9.5x.... it was running at 950 MHz. Today i turn it on and... 750 not 950 MHz!!! I tried to go to BIOS and save..., but then my computer didn't start! It is reacting just like it did when it had the L1 Brides locked on!

I've alredy opened the case and re chek the L1 Bridges on the CPU but the conductive paint i used, is still there connecting! They are also very well separeted from each other! It is a good job!

What a (/)(/) is apenning??? :confused::mad:

[David]

try the conductive job again, check the mobo jumpers and pray...

[App]

And before you start painting the bridges, clean and wipe them of well by means of pure alcohol. Good luck!

[oc jason]

maybetry with pencil and then coat it with conductive paint

[M@€$†®Ö™]

I have had the bridges go out on me when I penciled them and I had to repencil them again. Then I said heck with it and used the defogger kit trick and all is good 3 months later.

Maestro

[Oni]

I unlocked my bridges w/ a mechanical pencil about 4 months ago. Its still going strong @ 8.5*141 :)

[r_stripe]

Unlocked my Duron 850 with #2 pencil just to see what my max is, and was, and will be. Anywho, got it to 1100mhz @ 1.850v 9.5*116mhz (all was good, 3dmark fine, PI ran fine, Prime95 crashed around the 6th iteration. Not to shabby for aircooling. Speaking of that, Im gonna order the Thermaltake Sk6 and see how that helps. Currently backed down to 9*111 @ 1.65v. "Its not successful if Prime95 crashes".

-

[N3D2000]

Maybe I lost the conductibvity on my job as well...... i used a resin core solder and rubbed it in, al was well, then I turned it on and 800 was my speed, now I'm lucky to get 8.5 working. Maybe I should redo it?

[luismxc]

I think i got it.... I had the do the unlocking job again...the paint i used had to dry better....!!!! One of traces of the L1 bridges had gon out!!!! I had to do it again!