mushkin level II testings results

Hello Everyone

I did some testing with my system last week and wanted to know if the results are on par with what you guys are getting.
My PC is a Abit AI7/P4 2.4C/ Mushkin 2-2-2 special PC3200.

P4 - 2.4C Munshkin Level II PC-3200 2-2-2 Special
Timmings 2-3-3-8
Ram Speed Ratio Timings PC MARK 04 PC Mark 04
CPU Memory Score

299 3:2 TAADD 4739 5152
302 3:2 TAADD Rebooted on testing
300 3:2 TAADD 5108 4903
283 5:4 TAADD 4642 5107
283 5:4 SRADD 4653 5201
286 5:4 TAADD 4564 5300
287 5:4 TAADD 4704 5101
284 5:4 SRADD 4624 5063
288 5:4 TAADD 4678 5137
290 5:4 TAADD 4706 5259
290 5:4 SRADD No Boot No Boot
290 5:4 AAADD 4634 5159
291 5:4 TAADD 4583 4985
293 5:4 TAADD No Boot No Boot
299 5:4 TAADD No Boot No Boot
299 5:4 AAADD No Boot No Boot

While at 3:2 the system was a lot more steady, I got better scores at 5:4
Tried the stock timings 0f Cas 2.0 2-2-5 but it just would not work
Memory at: 3.00 volts / Tried 3.10 volts no much better results
CPU at: 1.625Volts
VGA at: 1.65 Volts

I keep thinking that I should be able to do better...

Thanks

Daniel

your should try 3.3-3.35v for Bh-5/6 ram, its usually the sweet spot

The sticks shouldn't need 3+ volts to do 2-2-2 @ ddr400 though. Get in touch with Mushkin, supposedly they are very helpful.

Thanks guys

I will shoot an email to Mushkin and see what they say..

Daniel