Need to OverClock Please

[Big_Tex]

I have a duron 850 on a ecs k7sem board I can change the bus in the bios but not the multiplyer. If I unlock it with the L1 bridges how will it change no jumpers on the board either.I can go from 100 to 133 bus and any where in between thru the bios.But I what to up the Multi too.So if i unlock the chip will it change anything for me since i have no setting in the bios or jumpers.

[Hugo 59]

Welcome to the forums Big_Tex. If your board doesn't support multiplier changes either through bios settings or jumpers then unlocking your L1 bridges wont do anything for you.

edit* Thank you for correcting me eobard it had been a long time since I looked at that article. Guess I should of looked again before I posted.

[eobard]

Unlocking all L1's frees the chip to be set by the board, unlocking some L1's, in a specific arrangement, lets you go from one fixed multiple to a different (higher) multiple. The L7's affect your voltage. The link to the article at Tomshardware is:http://www6.tomshardware.com/cpu/00q3/000711/index.html
Good luck.