Good cooling idea for presscot owners

[jenko]

As i have 2 80mm extracts on the back of case and the top fan is directly over the fets and power area of the mobo, i fitted a old areo blower fan there as it sucks air at a 90 degree angle it draws air from the fets and my heatsinks which a normal 80mm fan wont do.

Staight away my cpu temps dropped 8c to 33 idle with stock intel cooler, and case temps dropped 4c to 28c.

So if anyone has a blower fan gathering dust give it a try.
Wasnt sure which section to put this in.

[batboy]

I'm trying to visualize this. You have a Cooler Master Aero Fan like this one in the pic, right?

http://www.coolermaster.com/product_common_images/b1e1f6717cd8cae7381d783fa134866b.jpg

You mounted it in the top of the case exhausting out through the top? So the fan intake is down near the mosfets?

[jenko]

Thats the fella that side you can see in the pik seems to suck 80% more then the other side, so i pointed that side towards to mosfets.
When i said top i meant the top fan on the rear of my case as i have 2 on the rear.

It also helps as i have done the duct mod and the normal 80mm there was blocked by the ducting, as the blower sucks from the 90degree angle it isnt blocked by the duct.