The highest you could go with 1.2?

[The Coolest]

I got a 1,2 GHz T-Bird and I just wanted to know what are the speeds you have reached with ur 1.2 CPU no matter what steppings just the speeds...

[chawken]

Most of the 1.2 tbirds that I run are between 1.422 and 1.512 using air cooling. I know of a couple of people that are running theirs at 1.596 (9.5x168).

[JAWS]

I got mine stable at 1.533. I had to bump up my vcore to 2.08.
My cak38 is handling the temps fine!

[Mr.Lansing]

Not really high but no need to add vcore so pretty good i fink
(8.0x166) 1328Mhz but when it boots up it says 1333
i like this setting cause it looks like a 1.333Tbird
running fine
AGAIN CAK38 handles the temp well

[proze]

so far.. 1406mhz (148*9.5) on an 8kha at 1.8v.

[Wega!]

I'm at 1470MHz at the moment, but I'll get higher! :D I hope...

[IFMU]

Well right before I sold it I had my 1.2 up to a 1.6... granted that wasnt that stable overall... TV card caused it to crash every time... But it would benchmark fine, It ran everything else utterly beautiful... kinda wondering if maybe it was the programming... not real sure.. But I was able to back it down to.... er... 1.53 if I remember right and even the TV card wouldnt lock it up...

[jbslow]

Well maybe I shouldn't reply because I'm not sure how high I can go with my 1.2 but right now I'm running it @1.3 145x9. It's not that I cant go higher its just that I haven't , I really like 43c when I play games and I only can get up to 44c when I run benchmarks in loops of 10 or more. It's still summer when its 110f outside I'll just take my ocing slow , I cant wait until it starts cooling off :) .

[rugby]

I had my 1.2/200 up to 1500 (150x10) That was before it burned up so I don't have it anymore.

[Genis B]

i got my 1.2 @ 1.333 (133*10) running @26.1 c with a cooler master, go up to round 40 after black&white, and my Geforce 3 is running the core 200@235 and memory 460@544.
but for some weird reason, i can't go andy higher for that CPU, i've try it on 135*10, and it freze every 30 min during black&white.
can anyone help? it's 8K7A i am running.

[FRANK]

I've gotten my 1.2 AXIA to 1.47 (10.5*140) on an A7V133, currently running a 1.0G AXIA @ 1.4G on that board.

Good Luck!

[The Coolest]

I dont want to O/C my new comp yet, cause I got 52C idle and 57C @ full load...

I have a Super Orb as a cooler now I'm trying to hurry and build the water cooling sys so I can test it on the old computer and then modify for the new.

Just one question: I want to ask ur opinion on how high will the K6-III 400 not + will go with water cooling?

[The Coolest]

I'm afraid to O/C it with current cooler my regular idle temps are 52 and full load 57 and when I 'uped' the FSB to 134 so I got 1208 my idle temp became 54 anf full load 59-60C

[RJ]

Originally posted by The Coolest
I got a 1,2 GHz T-Bird and I just wanted to know what are the speeds you have reached with ur 1.2 CPU no matter what steppings just the speeds...



1502mhz

[popadel]

I got mine to 1466 - 1474 stable. at 1333 you dont even have to change the voltage and the temp stays prety muych the same.