I've had my Koolance Exos-Al for 6 months, with 3 waterblocks installed.
The liquid had gone from light green to black.
I'd like to clean the system out, completely flush the liquid and replace it with fresh liquid.
When I remove the Exos and turn it upside down, not all the liquid comes out. I have filled it with distilled water several times and turned it upside down again, but there is still an amount of black gunk that won't evacuate.
And all my tubes are still full of the original black liquid.
Any ideas on how to flush this system out completely? The manual is no help.
Thanks.
__________________
P4 3.0C at 3.983 GHz
Koolance Exos-Al with 3 waterblocks
vcore 1.60
Abit IC7 G - BIOS 24
2x512 MB OCZ 4000EL gold, 1:1, 2.5-7-4-4
5 x 120GB Western Dig hard drives
ATI X800 pro watercooled / Cat 4.7beta@ 555/1070
Sony 4X DVD-r
TDK Velocd 48x24x48 CDRW
onboard sound
onboard NIC
Win XP Pro / SP1
The liquid had gone from light green to black.
I'd like to clean the system out, completely flush the liquid and replace it with fresh liquid.
When I remove the Exos and turn it upside down, not all the liquid comes out. I have filled it with distilled water several times and turned it upside down again, but there is still an amount of black gunk that won't evacuate.
And all my tubes are still full of the original black liquid.
Any ideas on how to flush this system out completely? The manual is no help.
Thanks.
__________________
P4 3.0C at 3.983 GHz
Koolance Exos-Al with 3 waterblocks
vcore 1.60
Abit IC7 G - BIOS 24
2x512 MB OCZ 4000EL gold, 1:1, 2.5-7-4-4
5 x 120GB Western Dig hard drives
ATI X800 pro watercooled / Cat 4.7beta@ 555/1070
Sony 4X DVD-r
TDK Velocd 48x24x48 CDRW
onboard sound
onboard NIC
Win XP Pro / SP1