Very low benchmark results (6800nu)

[Venom21]

15K on 3DMARK01 se
49K on Aquamark3...

:cry:

What's thr problom guys ? :|

[Venom21]

Up :|

[Overclocker550]

link me to your score so I can see whats up. also your cpu may be a bottleneck if its a p4 under 3GHz

[nakatalee]

i think that's about right for 6800nu. try 3Dmark03 and see if you get 8K++ or 9K

[Venom21]

Thank you 2..:)

i overclocked my cpu to 3.4 and the scores are:

9700 3dMARK03
57K Aquamark
18K 3DMARK01

350/900

i guess thats ok right? :santa:

and for you Overclocker550:

http://n.rotter.net/User_files/nor/414f0caa725f8e99.html

My aquamark score before the OC..

[Kenshiro]

at 18K, score still looks a little low for your setup.

I score a little over 20000 with 3D marko1 with my 9800pro running at stock, and my CPU o/c to 2.65Ghz (AMD mobile barton).

You may have driver issues..... i think.

[Overclocker550]

or maybe your barton is way faster than his p4, its known that amd is faster in most benchmarks and games

[Kenshiro]

or maybe your barton is way faster than his p4, its known that amd is faster in most benchmarks and games


maybe you are right....

AMD RULES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!

[gigabit]

My best in 3dmark03 with my eVGA 6800nu is 9990 and of course the site was down for maintance for about 2 days.I score about the same as you in Aquamark give or take a few pionts.What temps are you getting with that card venom?Also have you ran this card on your second rig?That would be a good test.

[M3KaN_Sh33P]

How do you get a 6800nu to go 350/900 ???

[Woozy]

With out OCing i get 9838 in 3dmarker03. P4 2.5 gig Lame HP tower. Building my first just having fun in the meantime.

[gigabit]

How do you get a 6800nu to go 350/900 ???
coolbits bro or rivatuner.
here is a link to download either one.Coolbits its a reg hack after you down load it you click on it and it adds its self to the reg.And when you open up the control panel it giver clock frequencies

http://downloads.guru3d.com/

With out OCing i get 9838 in 3dmarker03. P4 2.5 gig Lame HP tower. Building my first just having fun in the meantime.

How do you get that score with a 6800nu and a 2.5ghz cpu whats it OCed to 4.3ghz...lol Seriously though what card do you have a 6800GT or what.Or did you get the number messed up..8938 with a 6800nu no OC would be about right..I would have to run mine at 375core /ram 875.Just to Get that score.

[Woozy]

How do you get that score with a 6800nu and a 2.5ghz cpu whats it OCed to 4.3ghz...lol Seriously thgough what card do you have a 6800GT or what.Or did you get the number messed up..8938 with a 6900nu no OC.I can run mine at 375core /ram 875.Just to Get that score.


Sorry I have 6800 GT. Not Ocing anything until I learn more about this new Vid Card.

[M3KaN_Sh33P]

I am already using coolbits.. I cant get the clock speed past 750 , becasuse its wont pass the test new setings part..??

BTW... I got a 9200 on 3dmark03 using the "Detect optimal frequencies" tab. Using the forceware 6573 drivers .

[gigabit]

JUST OC DONT RUN THE TEST .BUT IT SHOULD DO 750 NO PROBLEM AT ALL I CAN DO OVER 900 ON THE RAM AND OVER 400 CORE.WITH OUT ANY TROUBLE.HAVE YOU TRIED 61.77 I REALLY LIKE THIS DRIVER IT ALSO DID MY FX5900 GOOD TO.IT INCREASED MY 3DMARKO3 SCORE LIKE 400 HUNDRED PIONTS.

[Rottys-R-Us]

AquaMark 4984, Oc'd 400/800.

http://arc.aquamark3.com/arc/arc_view.php?run=349452124

And 9765 in 3Dmark03

http://service.futuremark.com/compare?2k3=3054985

[zakelwe]

My 6800 does 475/1140 as it is the Asus Gamer edition and is the ******* hybrid from hell ...

Nice card. mid range in cost between the 6800 and GT in the UK, so is it's performance.

Regards

Andy

[zjustin2]

maybe it's my cpu, but i have 63k on aquamark and 10.6k on 3dmark03 w/ my galaxy geforce 6800nu.

[Nandro]

475!!!!!! Thats insane

[gigabit]

maybe it's my cpu, but i have 63k on aquamark and 10.6k on 3dmark03 w/ my galaxy geforce 6800nu.
It must be because i cant break 9990 in 3Dmark03 and 56000 in Aquamark.

Upated
i just broke 63000 im Aquamark.But i cant ran a full 3dmark03 at these settings.

[gigabit]

I am already using coolbits.. I cant get the clock speed past 750 , becasuse its wont pass the test new setings part..??

BTW... I got a 9200 on 3dmark03 using the "Detect optimal frequencies" tab. Using the forceware 6573 drivers .
Dude its the forceware drivers switch to the 61.76 or 61.77 and you be able to go higher.I just installed the 66.10 and now its says card failed test at 330/710.Aint noway this happening because with the 61.77 i could oc way past 400core and 910memory.Try A regular nvidia drivers.I am seeing better results with them anyway.The foreware drivers from guru3d.com are not helping me at all.

maybe it's my cpu, but i have 63k on aquamark and 10.6k on 3dmark03 w/ my galaxy geforce 6800nu.

Nice card were did you find it at?I wanted that card to.But no one has that have seen.

i just got- 63,000
http://arc.aquamark3.com/arc/arc_view.php?run=1893087555

9601- in 3dmark03 .But my best is 9990 but server was down that day for maintance.Just my luck right
http://service.futuremark.com/compare?2k3=3172115

[Venom21]

My best in 3dmark03 with my eVGA 6800nu is 9990 and of course the site was down for maintance for about 2 days.I score about the same as you in Aquamark give or take a few pionts.What temps are you getting with that card venom?.

My temps are 56 idle and i haven't checked fload.
:thup:

[gigabit]

My temps are 56 idle and i haven't checked fload.
:thup:
We have very simular spec's except for our ram and are temps and score's are about the same.Is 3.4 as high as you can get that 2.8c.I can get 3.8ghz and pretty stable but its needs a lot of voltage.1.725 volts.But idle temps at that voltage are 34c and 50c loaded not real bad.But would be nice to have a vapor chill or something.Also i know eveyrone is gonna say cpu temps cant be lower than case temps but thats what its showing in the bios for cpu temp and my compu nurse shows about the same cpu temp.So im not really worried about the case temp.Also i have the side off the case and the AC is blowing right towards my case so maybe that has something to with the temps

[Kenshiro]

I just ran 3Dmark03 and 3Dmakr01SE yesterday on my computer with vid card at stock speed. My score is sad.

3Dmark03 = 5656
3Dmark01SE = 16426

I miss the days when I have my Abit NF7. The high FSB makes a hugh difference in the score.

[gigabit]

I just ran 3Dmark03 and 3Dmakr01SE yesterday on my computer with vid card at stock speed. My score is sad.

3Dmark03 = 5656
3Dmark01SE = 16426

I miss the days when I have my Abit NF7. The high FSB makes a hugh difference in the score.
This should probaly be in the ATi section but anyway thats a good score fore a 9800pro.If you have a r360 you could flash it to an XT.I know my old FX5900 would score about 5500 in 3Dmark at default settings and after i flashed it to a 5950 it scored 6500 almost every time i ran 3Dmark.And aqua mark was 47000 average.I ran 3dmark2001 a couple times and only scored around 18000 in that.With the BFGFX5900128mb top score in 3dmark03 was 6903.

[Venom21]

i just add 20mhz to the core speed and memory and ran 3DMARK03 (now 370/917):

http://planet.nana.co.il/Venom21/370X9173.3.JPG

nice ha? :bday:

[gigabit]

Yeah thats nice im a little jealous.I can not break 10,000. :cry: .And since 3dmark03 does not read the ram and gpu speeds right :mad: i dont remember what settings i had it at to get 9990....lol Well i didnt get to save that one anyway.Site was down due to maintance just my frigging luck. :mad: But Venom that is a sweet score.Was that at 3.4 or did you go a little higher on the cpu OC to? :clap:

[M3KaN_Sh33P]

Venom, thats a nice score.... I ve been trying to break that 10000 mark to no avail.

BTW .. what is the the deal with the null ps on some of the older nvidia drivers ,, I read where the 3dmark03 scores are being wiped out of the orb , due to the fact that peeps are calling this a "nvidia cheat". Although my 6573 drivers I am currently using doesnt have this option on there anymore,, I was just wondering if somone could explain how this was being used as a cheat for the 3dmark test ???

[Chemical_Steve]

3dmark 01, 16,399
3dmark 03, 8691
aquamark 51,529
a few tads to low eh?

[gigabit]

3dmark 01, 16,399
3dmark 03, 8691
aquamark 51,529
a few tads to low eh?
Yeah my nu beats that at defalut settings.What drivers are you using.If your using the stock install drivers that came with the card get rid of them.Get the 61.77 and coolbits.Also when is the last time you defragged the HDD.Did you have an ati card before this one if so do a fresh install of windows and them scores will be history.A BFG 6800Gt should be getting around 11500 in 3dmark03 65000 in aquamark at stock settings. Is your cpu OCed also?My 6800nu's best
9990 in 3Dmarl03
Aquamark03 63000

[Venom21]

Yeah thats nice im a little jealous.I can not break 10,000. :cry: .And since 3dmark03 does not read the ram and gpu speeds right :mad: i dont remember what settings i had it at to get 9990....lol Well i didnt get to save that one anyway.Site was down due to maintance just my frigging luck. :mad: But Venom that is a sweet score.Was that at 3.4 or did you go a little higher on the cpu OC to? :clap:

My CPU steel on 3.4 ghz but i droped my memory timings to 2.5-3-3-5 and also put the "turbo mode". :)

and by the way gigabit, did you try to open your card to 16,6 PL and vertex? (riva tuner)
unfourtunatly mine is unmodable.

[Chemical_Steve]

defrag all the time... never had an ati... i used the driver cleaner before installing the 61.77 drivers...

it broke 11k on 3dmark 03 when i first got it

[gigabit]

My CPU steel on 3.4 ghz but i droped my memory timings to 2.5-3-3-5 and also put the "turbo mode". :)

and by the way gigabit, did you try to open your card to 16,6 PL and vertex? (riva tuner)
unfourtunatly mine is unmodable.
I can only get into turbo mode with my cpu at 2.8-3.0 no higher.I havent run it in turbo though.AI7 dosent like turbo with PC4000 and forget about any higher.also my Oc on my cards dies at 415 core and 910 on the ram any higher.It wont pass the OC test But that high it just locks about half way through any bench mark but the fps is flying.I need better cooling .Im gonna get a NV5 soon.

defrag all the time... never had an ati... i used the driver cleaner before installing the 61.77 drivers...

it broke 11k on 3dmark 03 when i first got it

Man thats an awesome score but it Has degraded that much since you bought it.Or did you change something .Why is there now a 3000 point score dif?Bfg is my favorite card maker.Do you have the copper cooler or the original aluminum one that frist came with the BFG's