ECS 848P-A P4-M 1.7 @ 2.4Ghz How-To

[HotMod]

Easy mod if you don't mind breaking a pin. Just remove BSEL1 and the ECS 848P-A v1.0 detects 200Mhz fsb.

So thats 100% fsb overclock at 1.55v :clap:

Now if I could only change the multiplier :(

Been running SiSoft burn-in and the temp tops out at 41C

Seriously thinking of putting this in my AI7 to see what it can really do :)

[gnode]

Easy mod if you don't mind breaking a pin. Just remove BSEL1 and the ECS 848P-A v1.0 detects 200Mhz fsb.

So thats 100% fsb overclock at 1.55v :clap:

Now if I could only change the multiplier :(

Been running SiSoft burn-in and the temp tops out at 41C

Seriously thinking of putting this in my AI7 to see what it can really do :)

Were you able to adjust the FSB in the bios or were you locked at 200 MHz?

Also what FSB to Dram ratios were available in the bios?


Gnode

[DonnieM]

You can change the clock value in the BIOS on that board...I know, I have the same board. Go to the BIOS setup and look on the right at the top. It says something like Frequency/Voltage Control.