- Joined
- Dec 10, 2002
- Location
- San Antonio, TX
My only problem, I'm looking for a good/great performance radiator that I can use a 170mm comair rotron fan with. Searching around the pc sites have yeilded nothing fruitful that I want to use with my 2 comair fans.
Here's my basic idea.... I have 2 of these fans which are 6" in diameter basically. I plan on building a shroud "housing" that I will mount one fan blowing IN on the rad and another sucking off the rad like a wind tunnel with the rad in the middle. My concern is finding something of suitable size/performance for this. I basically want a 6"Hx6"Lx(whatever)"W chunk of pure rad goodness with 1/2" barb fittings if I can find it. I don't care how iit looks since it will be in the wind tunnel housing. Any ideas out there as to what I should use?
Also, if anyone has an opinion, I was thinking of leaving a little space between the fans and the rad inside the housing to minimize any dead spots. With it in the housing and good seals I should see any loss of air and it should hopefully be evenally distributed. Also, my fans push something like 230 cfm at 31 dba the way I modded them Very, very quite and it's going to be one heck of a wind tunnel!
Here's my basic idea.... I have 2 of these fans which are 6" in diameter basically. I plan on building a shroud "housing" that I will mount one fan blowing IN on the rad and another sucking off the rad like a wind tunnel with the rad in the middle. My concern is finding something of suitable size/performance for this. I basically want a 6"Hx6"Lx(whatever)"W chunk of pure rad goodness with 1/2" barb fittings if I can find it. I don't care how iit looks since it will be in the wind tunnel housing. Any ideas out there as to what I should use?
Also, if anyone has an opinion, I was thinking of leaving a little space between the fans and the rad inside the housing to minimize any dead spots. With it in the housing and good seals I should see any loss of air and it should hopefully be evenally distributed. Also, my fans push something like 230 cfm at 31 dba the way I modded them Very, very quite and it's going to be one heck of a wind tunnel!