A few days ago i was desperately looking for vagp mod for p4p800 but couldn`t find it anywhere on the internet. So after putting a thread in voltmod section, and some research, i came up with the following (credits goes to our mate pwnt by pat aswell):
I did this mod and it worked for me flawlesly. I`m keeping the resistance at approximately 100k, and it is about 0.2V higher than set in the bios.
That means 1.5V is actually 1.7V and so on (<=2V). It can be higher than 2V too, just lower the resistance.
Do not raise the voltage above 1.7, if you don`t have decent active cooling on northbridge!
Remember, do this mod at your own risk, if you screw up something doing this mod, neither me nor anyone else except you are to blame!
In case you don`t know what this mod does and whether you need this mod or not, forget it, you don`t need it now!
Good luck!
I did this mod and it worked for me flawlesly. I`m keeping the resistance at approximately 100k, and it is about 0.2V higher than set in the bios.
That means 1.5V is actually 1.7V and so on (<=2V). It can be higher than 2V too, just lower the resistance.
Do not raise the voltage above 1.7, if you don`t have decent active cooling on northbridge!
Remember, do this mod at your own risk, if you screw up something doing this mod, neither me nor anyone else except you are to blame!
In case you don`t know what this mod does and whether you need this mod or not, forget it, you don`t need it now!
Good luck!
Last edited: