Cpu Hsf On 4200ti Advice Plz!!

[BRIMCV]

Hi i have a PALIT 4200TI not the greatest of makes my score in 3D MARK 01SE is around 11000 ISH.

The memory on the card is HYNIX 318A HY5DV281622DT-5.

Im planning a mod of replacing the stock HSF with a CPU HSF that i have.
I have the drills for the Heat sink.
I need advice on mounting this sink its a AKASA 824CU sink

Specs os Sink

Supports AMD™ Athlon™ XP 2800+
80mm Ball Bearing Fan, 25mm High
Fan Rated Speed 2,500 R.P.M.
Fan Air Flow 31.37CFM
Fan Noise 27.85 dB(A)
DIM 80 X 80 X 61mm
pics of card and Heastsink.

Images of card And sink

http://img83.exs.cx/img83/3346/P1010121.jpg
http://img82.exs.cx/img82/8168/P1010053.jpg
http://img83.exs.cx/img83/4404/P1010122.jpg
http://img88.exs.cx/img88/6900/P1010115.jpg

Currently Clocks are

Graphics Processor Properties
Video Adapter nVIDIA GeForce4 Ti 4200 with AGP8X
GPU Code Name NV28
PCI Device 10DE / 0281
Transistors 63 million
Process Technology 0.15u
Bus Type AGP
Memory Size 128 MB
GPU Clock 250 MHz
RAMDAC Clock 350 MHz
Pixel Pipelines 4
TMU Per Pipeline 2
Vertex Shaders 2 (v1.1)
Pixel Shaders 1 (v1.3)
DirectX Hardware Support DirectX v8.1
Pixel Fillrate 1000 MPixel/s
Texel Fillrate 2000 MTexel/s

Memory Bus Properties
Bus Type DDR
Bus Width 128-bit
Real Clock 209 MHz (DDR)
Effective Clock 418 MHz
Bandwidth 6688 MB/s

[f00t]

i would position the hs on the card and temporarily hold it in place with hot glue or tape. then i would insert the card into theagp slot and adjust the hs so it will fit comfortably. next i would mark the spot where the mounting holes are on the hs and then remove the hs and drill the holes. then remount the hs on the card using small bolts. thats not too bad.

check some of the card modding pics in the gallery for some inspiration

[BRIMCV]

Cheerz for the reply all the help all the better checked the cards in the gallery sum nice stuff.

[Lunatic_Freak]

Check out my Ti4200 with a Chrome Orb Socket A cooler here http://members.shaw.ca/lunaticfreak/Pics1.htm