Duallie WC advise, please!

[G_Noraa]

I want to Watercool my dual 2400XP and I want to use the following parts I have from different rigs.
Please let me know if this single loop it's possible or just a dream:

MPC600>BLACKICE_EXTREME>HDD_COOLER>MCW5000A>MCW6000A>MCW50>MCW20>

I’ll use a YStech Fan 38X120 160CFM in my LianLi PC70.

I’m not overclocking and I would like to know if the pump will be able to manage all these components. I know that MCW20 it’s not necessary but I would like to use everything and not leave anything lying around.

Please let me know your comments.
Thankx

[nikhsub1]

should be fine, although I would use identical CPU blocks, but those 2 should be fine. The pump will be fine, but the HD cooler is a waste IMO but again, will be fine.

[thegame]

well he might have a scsi drive and they can get hot, but still dont need WC for them. just any HD cooler will do.

[G_Noraa]

Thank you very much for answering.
I´m using different CPU blocks because they come from different rigs I had. I´ll build it up and see how well it goes. I will post againg in a few weeks and try to have some pictures.

Thanks again.

[Jen]

I was useing dtek pro core and bix and still had higher temps than i liked up to 62c. i would suggest a big heater core.


Jen