what just happend?

[FizzledFiend]

[17:21:41] Finished a frame (162)
[17:26:37] Finished a frame (163)
[17:31:24] Finished a frame (164)
[17:36:13] Finished a frame (165)
[17:56:11] CoreStatus = C0000005 (-1073741819)
[17:56:11] Client-core communications error: ERROR 0xc0000005
[17:56:11] Deleting current work unit & continuing...
[17:56:16] Trying to send all finished work units
[17:56:16] + No unsent completed units remaining.
[17:56:16] - Preparing to get new work unit...
[17:56:16] + Attempting to get work packet
[17:56:16] - Will indicate memory of 511 MB.
[17:56:16] - Connecting to assignment server
[17:56:16] Connecting to http://assign.stanford.edu:8080/
[17:56:16] Posted data.
[17:56:16] Initial: 43AB; - Successful: assigned to (171.67.89.154).
[17:56:16] + News From Folding@Home: Welcome to Folding@Home
[17:56:16] Loaded queue successfully.
[17:56:16] Connecting to http://171.67.89.154:8080/
[17:56:24] Posted data.
[17:56:24] Initial: 0000; - Receiving payload (expected size: 3878702)
[17:56:51] - Downloaded at ~140 kB/s
[17:56:51] - Averaged speed for that direction ~252 kB/s
[17:56:51] + Received work.
[17:56:51] + Closed connections

[Seabee]

Looks like you got partial credit for it. Maybe it was just one of those odd errors. I personally would only worry if it keeps happening.

[LevaR]

I've seen similar error on my friends rig, only it was happening with every wu he got. I downclocked his athlon from 1.8 to 1.6 and so far it finished two wu's without problems.

[actong]

[17:56:11] Deleting current work unit & continuing...


I believe this means the results were discarded, meaning no partial credit.

[Xenocide]

too high overclocked / unstable

[FizzledFiend]

too high overclocked / unstable

wonder why it all of a sudden appeared. been running fine for months until just now..deleting cores and starting over we shall see

[TommyHolly]

I have seen this a few times on the large work units. These will tend to end early and you'll get only a partial credit in that case.

[stan03]

was this on a computer with bigpackets?

[Audioaficionado]

Too many frames. Looks like a Tinker unless they started >100 frame BigPackets.

[JetMech]

I believe this means the results were discarded, meaning no partial credit.I agree. This could happen at any time but don't count out it just being a bad wu. Like said above don't worry unless it continues to happen.

For the system that was dropped from 1.8 to 1.6 that big a drop may not be necessary. One click up in voltage or two FSB increments down might fix that.

[FizzledFiend]

well it isn't the OC all sorts of things have started happening to my main rig....I dunno why or even if this is possible but I broke the system down to bare parts and redid windows. I used only teh lastes drivers from manufatures websites..like ATI drivers instead of Omega, Nvidia Nforce drivers instead of ABIT's

still acted wobbly..so i swapped out parts I din't last time.. like keyboard and IDE cables......folding right now after 2 days of :bang head

so far all is good. if I can get thru a work unit alright Ia m going to add anotehr component back to my system and fold some more..keep adding till all is back in and happy



BTW I went from a wireless keyboard and mouse back to wired and thats when I last saw the instability...this make any sense to anybody?

[FizzledFiend]

well that didn't do it.

I decided to feed the cpu more juice. i was reluctant to pump more than 2 volts into my Mobile Barton, but I read that they can handle the same amounts as standard Bartons. have her running on 2.1 volts now and went from 35 load to 41 load. so far I have gotten 2 hours stable folding *crosses fingers*

I am curious as to why i am haveing to pump more juice into this chip over time. i wonder if the gates are going south and i should start saveing up for a replacement chip.