T-bird @ 1.84GHz, should I try for more?

[AtomicGuY]

CURRENT CPU SETUP
Specs:
AMD Athlon T-bird 1.4GHz (266) AYHJA R @ 1.84GHz (320)(11.5x160)
2.1V CORE / 3.6V I.O
See SIG below for more

COOLING SETUP
Cooling Temps:
CPU: 24c idle / 46c load
MB: 23c idle / 28c load
Cooling Specs:
18 80mm Casefans on a FULL ATX Server tower with twin 525W powersupplys (1KWatt), and an SK-6 with a 150mm 8K furnace fan mounted.

My CPU is on the verge of corruption since almost anything wont work to get it higher. The only thing I can think of is going past 2.2V. I could try 2.3V with the processor and fire it up and see what happens but thats getting to the point of frying the chip already.

Overclocking goals,

11.5 X 161.33 = 1855MHz

11.5 X 162.33 = 1866MHz

QUESTIONS FOR EVERYONE,

has anyone ever hit past 1.84ghz with air cooling or 46c or higher?

Is my temperature gonna be ok under full load @ 1866MHz with my setup?

And finally, I'm gonna need 2.3V, Ive tried 2.2V curiously before but it wasnt enough to get windows stable for more than 3min. Will 2.3V be stable?

This will be an interesting overclock.. please post any help because I'm actually really broke since I got my new car and I cant afford to toast my CPU. I understand my overclock already is breaking a few air cooling records, I want to hit 1866MHz, I really like that number and want to aim for it!

thx in advance,

AtomicGuY:D

[mEKbOY]

well. I was in the same situation as you.. Should i raise my voltage to the 2.2v or higher to get that extra few mhz. After doing some thinking i said no for the following reasons. Not only will the life of your cpu be shorter but your motherboard will burn out very fast... Even though you have more voltages for more cpu stability the amount of heat that these voltages put out on your system is huge. It realy is not worth.. once you have gotten that 40-50% increase speed with normal air or water cooling then you should be happy and leave at that.. only something like a vapochill would tempt me do such things. BTW... wait for a 1.53ghz or 1.4ghz palamino... there lower stock voltages may mean better overclocks..we will see.

[mEKbOY]

Oh.. i forgot to say... when i did put my voltage to 2.2v it blew out my 430 watt enermax power supply. and nice to see another overclocker that has the same gripes and thoughts that i do atomic.

Mek

[AtomicGuY]

Currently, I plan to hold out with this processor till AMD hits 2000MHz and I'm thinking that will be a T-bred processor. With the T-bred processor, I'm gonna try for 2.4GHz.

I've seen so many people with temperatures above 50c and even 55c, its rediculous, thats why I thought my 46c would be ok for an extra few mhz, I didnt think that .2 volts would impact so bad. Then again, at this speed, .1 will raise my temp like 4c so I better be careful.

-----------------
yea, I got two powersupplys in my pc, one for the fans and components such as DVD and harddrives, and the other is for the motherboard and processor. A 525W powersupply dedicated shouldnt blow should it?

[mEKbOY]

Yeah.. i try to never let my temps go above 50c on load. I will not put anymore pressure on a cpu if it takes over 50c... i dont see the 2ghz AMD's for about 5 months at least.. I dont know about but i sure couldn't got that long without wanting or"needing" to upgrade. One thing i have been considering is one of those tyan thunder k7 motherboards. The challeges have a dual overclocked athlon is tempting.. You ever thought of that?

[AtomicGuY]

No,
the experience with my friend's Duel P2 450MHz turned me off. The way the CPU threads with the OS is rediculous, and only 3fps more in Quake2 at the time. I didnt think of multi processor solutions anymore after that. AMD needs the technology that 3DFX used to make scaleable CPUS happen more efficiently. Thats why deulies are for servers, cause the performance differnece is isnt enough for 3D floating points.

[AtomicGuY]

ohyea!:cool:

I think I did it, I'm running @ 1855MHz with 2.25V, not 2.3V and it seems stable! I've even had prime run for 10min now without crashing. temp is 50c now thou. I think I'm gonna try for 1866MHz if Prime runs without crashing for an hour.

[AtomicGuY]

Even better!,

btw I forgot to tell you all that I found the limit in my Abit KG7-RAID's AMD 760 chipset! It craps out at 161MHz FSB so far. The only way I can use 162MHz FSB, is if I put the I.O voltage to 3.7V.

So, here it is, I hit 1866MHz folks! with 2.25V Vcore and 3.7V I.O. It seems to run everything fine except Prime95! DAMN!, I wish I could get prime stable too! The temperature of the cpu is at 29c idle right now but it should cool down to at least 27c or 26c later on.


OK, so it boots, seems ok but prime gives me errors. Should I try for 2.3V or should I stop before I @#$k my chip over? Im HYPER NOW man. YES yES, I love my chip.

ah Prime crashes, will the 0.05 volts make it crash free?

[Wega!]

1: I wouldent use 2.3V on a T-Bird.

2: Could we see some screen shot's?

[AtomicGuY]

yea, if I can get it stable @ 1866MHz, right now, I put it back to 1855MHz for stability reasons. I think I hit the absolute max on my motherboard and processor. Even the KG7 wont go past 162MHz even if I use 3.8V, so I had to put it down to 3.7V and stay @ 3.7V. @ 1855MHz, I can use 3.6V I.O, I like it there.

[AtomicGuY]

I'm also running out of options for the VCORE, the voltages are 2.25V/2.3V/2.35V and (2.4V ABSOLUTE MAX).

QUESTION: What is the specs for the vapor chilled thermally excelerated Athlon that runs at 1866MHz? I need to know this.

[UnseenMenace]

I would love to see some screen shots of this system especially the SI-Sandra memory scores and 3D Mark 2001

[AtomicGuY]

Kyrotech modified the multiplier so that it was 14X,
"In order to reach 1.866GHz Kryotech uses an Athlon-C running at 1.4GHz (10.5 x 133MHz) with the multiplier modified to be 14.0X. This results in the sub-zero cooling of the CPU allowing for a 33% increase in clock speed, a similar increase to what Kryotech has been able to achieve in the past."

How the heck do I do that? My motherboard only goes to 12X, the 12.5X is now used for 1300b+ Athlons.

Here is the product info for the Kyrotech 1866MHz Athlon system,
http://www.kryotech.com/thermal_acceleration.html

[Wega!]

Still no pic's? Just run 3D Mark 2K1 or Sandra and when the score is displayed on your sreen, you press "Print Screen". Go to a MS Paint, and paste the pic in there, save it, and convert it to a .gif. Then post it here.
Thanks a lot! :)

[AtomicGuY]

1855MHz is only 12MHz higher than I had before, its a bit better but u should check out my benches @ 1843MHz before. Im gonna try to get a 14X Multiplier on my processor. Here is the diagram I've been referred to get 14X with my KG7.

[Bubba]

What kind of paste is that on the chip, definately not Arctic Silver.

[AtomicGuY]

My Snadra CPU mark score will diffenately be over 5000 points. My 3D Mark 2001 score before was 7225 at the highest I ever gotten so I should be able to hit 7230 at least with a 12MHz increase.

[OC-Master]

white out! LOL

j/k, conducter stuff for the bridges, it looks like to me.

[mEKbOY]

Well in order to get those high multipliers you need the right bios. This is the No. 1 reason why i stick with iwill is that there boards are strictly for overclocking.. They offer bios updates that allow for 14x multipliers. Look around and try to find a custom bios for your board. As far as the super cooling the www.vapochill.com is the way to go. Its $600 and $2400 like the kryotech... with your compenents you could handle anything with it.

[AtomicGuY]

That picture is of the Athlon 1.4GHz chip used in the Kyrotech systems. I believe thats conductive ink what your referring too.

[UnseenMenace]

Where can we see benchmarks ?.. preferably SI-Sandra Memory benchmarks and 3D Mark 2001

[AtomicGuY]

Here is a benchmark of an accelerated 1866MHz Athlon running Quake3 Arena @ 640x480x32 with SDRAM.

[AtomicGuY]

Aquamark stress test on 1866MHz Athlon (133x14). I should be able to beat the performance of the Pentium4 on this test since I got a hiher fsb which should make up for the 11MHz right? and I got DDR, they use SDRAM in that benchmark.

[UnseenMenace]

Originally posted by AtomicGuY
Here is a benchmark of an accelerated 1866MHz Athlon running Quake3 Arena @ 640x480x32 with SDRAM.

that may be a picture of 'an' accelerated 1866MHz Athlon running Quake3 Arena @ 640x480x32 with SDRAM. However it is not your system, as you run a DDR mobo. This system for all I know could run a vapochill/kryotech or liquid nitrogen cooling which obviously changes things, not to mention that the benchmark can be easily faked with the 'speed cheat' software, I am not suggesting that this is the case but I would like to see benchmarks of 'your' system at the speed you quote with SI-Sandra benchmarks for memory if possible and a 3D mark 2001 benchmark as not only will this clearly display how impressive your system is, but will reasure my doubts. :)

many thanx.

[AtomicGuY]

Holy man,

@ 1866MHz (162.33x11.5) with 2.25V / 3.7V, my computer runs at 52c MAX, holy crap, and thats with folding running for 30min.

crap man, thats ALOT OF HEAT! THAT SK-6, I cant even touch it almost. BUT im gonna need 2.3V if I'm gonna get it stable enough to run Prime.


HAHAAHA, I reached the end for AIR cooling, 18 80MM case fans and 4 80mm fans in my power supplys!, and the 150mm fan which is the loudest and most dangerous of them all (I sharpened the blades!). And already 52c.


I think I'm gonna give up and leave it at 1855mhz.

[AtomicGuY]

UnseenMenace,

those two benchmarks above were pulled from Anandtech and there legit. As for my benches, I squezze for time so I try to get them in but didnt you see my 1840MHz shots from before? anyhow, I posted like 30 benches. With 12MHz more, u do the math, thats like 1fps faster in Quake3 arena. 5 3dmarks more at most.

[UnseenMenace]

While those two benchmarks above were pulled from Anandtech nobody can state that they are legit without having viewed the machine that created them first hand, although I have no reason to doubt them, due to the fact that I know nothing of the machine.... I have been read previous threads on your system and consider many comments to be way out of line.. I have not however seen a benchmark for SI-Sandra memory or 3D mark 2001 for your system, is there any chance you could provide these two benchmarks please.

The reason I am interested is that I am not aware of anyone obtaining the tempratures you are with a 1.4 and obtaing a speed such as yours with air cooling. I am currently starting to build my new PC and would obviously like as much information so that I can consider if a similar feat is achievable for myself

[AtomicGuY]

3Dmark2001 fluchowaits between 7180 and 7225Marks and sandra's MMX/RAM Bandwidth is 939 MB/s and the Float FPU/Ram Bandwidth is 832 MB /s. Thats @ 1840mhz, I dunno @ 1855MHz, I will do the whole becnhmark thing again later.

[AtomicGuY]

UnseenMenace,

then u better pull out your Zigsaw and prepare to drill 9 fan ports, and 36 holes for mounts for the rack fan system. be sure to leave an inch at least between each port thou or the metal will be too weak. The SK-6 will work fine too.

I'm still waiting for something better thou. I want something exactly like the SK-6 except taller so it can hold more heat in the metal.

[UnseenMenace]

Wow that sounds impressive and difficault. Is there any chance you could post a picture of this setup as well please, so that I have a better idea of what the task involves

[AtomicGuY]

LOL,

it was halarious when I was at the computer store and they were wondering what the heck I was doing with 20 80mm fans (2 for backup!). I said, known of your business guy, cause if u say your overclocking, they wont sell CPUs to you, it sucks.

But yea, if you build a computer with this many fans, it would be a good idea to have twin power. It's easy to do, just find some room in the back of your full tower, (There is always room) and mold in the second psu. Since it's ATX, you will have to mod it so that it turns on the instant you hit the power switch in the back. there was a thread earlier back in these forums that explains how to do this. i try to find it for u.

[AtomicGuY]

http://www.hardwareoc.com/dualpsu.php
here's the link to a good site that explains how to hook up multiple psus

[Rob Cork]

About the psu - I ran 2.32V through my duron at 1 gig for about 4-5 months, with no problems. That was with a no-name 300W psu, so either my generic one is a hell of a lot better than I give it credit for, or you just got unlucky MekBoy. I would be wary though of going any higher than you are at the moment on the voltage, as your temps are getting a little high.

I want to try a volt mod on my KG7-RAID when it comes, my watercooling's doing just fine at 1600 and 1.85V at the moment - about 13C over ambient under load (around 37C). I'd have thought even raising the vcore to 2.1 or 2.2 shouldn't raise temps much more than 40-45C. Man, I love watercooling! :D

Keep us informed AtomicGuy :)

[Rob Cork]

Hadn't read all those replies when I posted my last reply - man this thread is growing fast!

AtomicGuy, seeing as you're running these benchmarks anyway just grab a screenshot - otherwise I can tell you you'll find a lot of sceptics around. Below is the sort of thing I mean, this one just took me 5 mins:

[Superman53142]

I believe him. Why? Because he has no reason to lie.

Remember: you can only lie about an overclock once. The next time people will remember and you will be only further discredited.

[William]

extraordinary claims require extraordinary proof


that is an excellent overclock, but I will need to some benches and screenshots before I believe it. I have poked around with radiate and it is certainly possible.

[Shadow ÒÓ]

wow! that's almost impossible to believe!

I'd love to see some screen shots as well........OC'ing that high with air cooling? You've done something most everyone else around here has yet to accomplish!

[TranceBear]

I have been waiting for many months, I wait to see how you done this. It just may help others. If you do not provide the ways and meens you did this it will only affect people who will buy your setup thinking they can actually do this and get very ****ed that they cannot. We would encourage any questions you have on obtaining a screen shot.

[Paul -The Mad Hatter]

this has been posted like 2 times before, if you want the benchmarks search for it.

I don't care about the benchies, i just want to see the case! 18 fans! i got to se that.

[Superman53142]

Originally posted by Paul -The Mad Hatter
this has been posted like 2 times before, if you want the benchmarks search for it.

I don't care about the benchies, i just want to see the case! 18 fans! i got to se that.

Agreed. 1.84Ghz is little more than a number. The case on the other hand, I'd like to see those 18 fans and how you arranged them. That can help me. A number cannot help me.

[Superman53142]

Originally posted by Would71
I was waiting for someone else to remember last time.. thanks! :D

Is this, by chance what you were remembering?

AMD Athlon T-bird 1.4GHz (266) @ 1.84GHz (http://forums.overclockers.ws/vb/showthread.php?s=&threadid=23881&perpage=30&pagenumber=1)

Or was this it?

AMD Athlon T-bird 1Ghz (266bus) @ 1.67GHz (http://forums.overclockers.ws/vb/showthread.php?s=&threadid=23885&highlight=1.84Ghz)

Let me make it clear that I am not and will not pass judgement on the validity of this claim. I simply did some searching after the, shall I say, suggestive remarks that some people made in this thread.

[rugby]

I'll believe it when I see it. Until then I'm a skeptic.

[AtomicGuY]

The first link was one of the links I was referring to,

the second link was an overclock of an AXIAR chip that I had before then sold. I had two threads with over 70 responces with tons of benchmarks at 1843MHz. For some reason, this new forum sux cause it doesnt allow large pictures so it removes them! :confused:

[phiber]

Originally posted by AtomicGuY
The first link was one of the links I was referring to,

the second link was an overclock of an AXIAR chip that I had before then sold. I had two threads with over 70 responces with tons of benchmarks at 1843MHz. For some reason, this new forum sux cause it doesnt allow large pictures so it removes them! :confused:
then put them back up

[Mr Fuzzie]

How did you get that high of a voltage on a KG7-Raid? i thought the max was 1.85.
Hey if i was buying a board, which one...KG7-Raid, Gigabyte 7dxr, or epox 8k7a+?

[jbell]

rob cork -- dude nice web site read everything and got some great ideas - kudos!

[thefly]

Grin I remember this guy as well.

good lingo


Bring on the screen caps

:rolleyes:

[Rob Cork]

Originally posted by jbell
rob cork -- dude nice web site read everything and got some great ideas - kudos!
Cheers - it's not really 'finished' (in so far as any website is), I'm waiting for my write-up on my case to be done to really pad the site out a bit, then I'll start asking around for linkage, and decide whether or not to register a domain name... :)

[jbell]

I have some extra dynamat laying around from my last stereo install - think that would reduce noice?? metal naturally creates sound - remove that ability and teh only thing making noice is that tiny 80mm hole in the back and front and NOT the whole case!!!

I am going to add either 1 or 2 120mm fans to my case at least blowing out from the top and maybe one sucking in at the bottom

[ReTiCuLeX]

Hmm... If I get a good palamino when they come out I wana race you all to the top w/ my water cool sys and a 172Watt pelt lol and about 10 120mm fans in a lilian case =) bruhahha o yea I just preorderd xbox duno if its worth it but im tierd of breaking my pc and not being able to play games lool. If I fix my asus a7m266 with a voltage mod ill be looking to race you to the top atomic guy w/1.4 @ 1.9 10.5x181 =) bruhahaha looks impossible but hey u never know its like newyork lotto.

[ReTiCuLeX]

O wait I forgot to mention what ever happen to the dude who dipped his cpu in alcohol and got like 20000000000ghz ? any one remember that post i was dieing laughing lool.I remember he couldn't even show us SS's lolz. Atomic is koo thoe I take his werd :P but i really would like to see his case and a benchmark on sandra that would be sweet.

[Bubba]

Hey, Reticulex what's the deal with your A7M?Is it just not stable or did you take those resistors off?

[SickBoy]

Atomic-
It looks like you're going to have to post some screenshots and some case pics if you're going to win people over on this one(including me). If they won't post in the Forum(due to space/size constricts or otherwise), I have space on my web site and would be happy to post them for you so you can post links to them.

SickBoy

[train22]

wait a min... how did you get such high Vcore voltage on the KG7 so high? They are capped at 1.85, how did you get it up so high???

(pardon me if it was mentioned but I don't have time to read all the middle posts)

[Paul -The Mad Hatter]

Originally posted by train22
wait a min... how did you get such high Vcore voltage on the KG7 so high? They are capped at 1.85, how did you get it up so high???

(pardon me if it was mentioned but I don't have time to read all the middle posts)

he most likely did the vmod

[train22]

can you tell me how to do that mod? I'm interested but scared...

[AtomicGuY]

i got little time once agian with postsecondary started and all and job but here is a quick double shot of the fans in the back of the tower. There is a total of 7 included with two powersupply fans in the rear of the tower, I'll also take a quick shot of the input flow fan in the front of the case which I'm really proud of, it realy keeps things flowing.

[AtomicGuY]

ok, this is the fan hole I spent four hours carefully moding. It completly ports into the computer where it blows at all the major components. This fan is a high speed 6100rpm 80mm fan that is my second favorite.

And of course, nothing completes a tower without an Athlon sticker eh?

[AtomicGuY]

one last shot, this is the same as above except closer up!,

hey, anyone interested in moding there case to the extreme? Remember, any case can handle almost any number of fans. You just gotta have the right tools. For my design, I used a Dremal, Zigsaw and a sawdering iron.

[train22]

can we see the sides, that's only 4.5 fans. Just take a pic of each view.

ps... the first pic looks "dubed," did you edit it?:D :p No offense or anything...

[AtomicGuY]

no, its one picture with two web cam pics pushed together.

I use all Sunon fans!

[train22]

why 2 pics of the same 2 fans?

[AtomicGuY]

u gotta love the Sound Blaster Live! Platinum 5.1

[TranceBear]

If I could only lock a thread!!

[train22]

Originally posted by AtomicGuY
u gotta love the Sound Blaster Live! Platinum 5.1

why are you posting a pic of the logo?
did you stick a hidden fan in there?:D :cool: :p

[eh?]

I really think that he is bending the truth a wee bit..... And i will be a nonbeliver until i see a screenshot... Also all this time to take pictures of everything else except the benchmarking screenshots????

[AtomicGuY]

Here is my case panel, the other panel is clean with no fans on it. Just the main access panel has 9 fans. The pic below shows 8 of the nine fans. The ninth one is just above the two at the top. I managed to saw right on the metal fold.

[AtomicGuY]

drdingo21,

I took many benchmarks before, obviously u never saw them and if u dont believe, thats nice, like I care. The reason I'm posting pictures of my case is cause people wanted to know about moddin and I've had a couple private messages asking what I did with my case!


update,

crap, that picture looks like hell, sorry guys/gals.

[RyE]

i believe him

[Superman53142]

Would it be too much to ask to see a few benchmarks? If they're too big to post PM me and I'll give you my email so you can email them to me. I, being human, am not sure whether to consider this fact or fiction and if I saw some benchmarks I would be convinced.

[AtomicGuY]

ok, here is a smooth port that cut right into the handle on my panel. I still managed to get a screw nicly into place believe it or not, and it looks like a plain professional job i think.

[AtomicGuY]

Superman53142,

If my computer countinues to be stable @ 1855MHz, I will take some benchmarks this weekend and send them to u if u want. Did u want that bloody 3dmark2001? I hate downloadin that thing over n over. Its not like I have a terrabyte of space!

I like sandra for benchmarking.

[Paul -The Mad Hatter]

Originally posted by train22
can you tell me how to do that mod? I'm interested but scared...

check this out http://www.athlonoc.com/voltagemod1.php

[sfa ok]

I would think that you would have enough space to keep 3dmark... (120 GB)

Could you please post some benches? I don't want to sound like I'm accusing you of anything, but Sandra can be faked with the speed cheat, while 3dmark can't. Or a pic of it POSTing, since you have a digital camera?

[chaosdriven]

Originally posted by AtomicGuY

COOLING SETUP
Cooling Temps:
CPU: 24c idle / 46c load
MB: 23c idle / 28c load
Cooling Specs:
18 80mm Casefans on a FULL ATX Server tower with twin 525W powersupplys (1KWatt), and an SK-6 with a 150mm 8K furnace fan mounted.


AtomicGuY:D

I hope you wear ear protection while in the room with that thing!
A fire extinguisher close by might also be handy....LOL!:p

[Pinky]

Originally posted by sfa ok
I would think that you would have enough space to keep 3dmark... (120 GB)

Could you please post some benches? I don't want to sound like I'm accusing you of anything, but Sandra can be faked with the speed cheat, while 3dmark can't. Or a pic of it POSTing, since you have a digital camera?

I wouldn't go that far. I'll accuse you right to your, well, username :).

There's no doubt you have a decent rig. I read through this entire thread (about 75 posts). The few rather focused/limited pictures clearly show it's not a coffee maker.

I apologise for some of the members having fun with you, and it seems like no real harm is being done since you're having fun back.

I hope, though, we can put our energies into something more constructive. There's a lot of people struggling with their PCs and a lot of attention, including mine for these 3 minutes, is being diverted to the wrong place for real overclocking. Here.

[TranceBear]

Originally posted by Pinky


I wouldn't go that far. I'll accuse you right to your, well, username :).

There's no doubt you have a decent rig. I read through this entire thread (about 75 posts). The few rather focused/limited pictures clearly show it's not a coffee maker.

I apologise for some of the members having fun with you, and it seems like no real harm is being done since you're having fun back.

I hope, though, we can put our energies into something more constructive. There's a lot of people struggling with their PCs and a lot of attention, including mine for these 3 minutes, is being diverted to the wrong place for real overclocking. Here.

Well said Pinky, let's move on!!

[AZZKICKER]

dood look

we all know the deal here so stop making a fool out yourself

if your @ 1855 and have been
why you talking about If ITS STABLE youll do a screen shot

everyone in this forum will tell you they aint seen nothing from you

show us the proof or shut up

i think i speek for the "most" of us

[AtomicGuY]

Well you would'nt want a posting of benchamarks from a CPU that isnt 100% stable would you? Thats just dirty man, which remines me of Intel's P3 1.13GHz CPU that had all kinds of problems, and then most people didnt care and just blew it off. Then it lost its name and Intel was forced to recall.

I gatta play some games, screw around for a few days then if all is well, then I'll be satisfied.

[Jon]

SHOW ME THE MONEY!

[ReTiCuLeX]

I hit 2Ghz but im sorry im not sure if its stable don't think I should post bench marks rite ? lmao.... its a jk... Hey atomic bro just take a nice CPU SS and multimedia etc... and have the time date on ur screen and ull be all set :-) It is hard to belive Air cooled you could hit 1.84Ghz some people with vapo chill are having trouble with 1.6 soo how can u run 1.84? to get a good OC u need very VERY VERY good temps like hmm 15c or below I say and you need alot of vcore / ddr voltage. I can't even hit 1.6 Stable without geting a blue screen and I got 81F so wuts up with that huh ?

[Mr B]

I'd have to agree with Would71 here...at least on that point.

I'm also curious... as I look at all of the technological marvels in your "sig", the best you can come up with are those pics?

What did you use for a camera?? Just curious....

And please, a benchie of anything showing this rig at that speed, stable or not, would be something we'd all like to see. Sandra, 3dMark...you choose.

The proof is in the pudding, and we're hungry.

[rugby]

Is it chocolate pudding?

[sfa ok]

Sure, I'll take benchmarks if it's stable in all but Prime95. I'll also take a pic of the POST, which we all know doesn't show stability. I'd really like to see some Sandra and/or 3dmark scores.

Also, what OS are you using?

[train22]

If I were you, I'd stop with the bull, if you have no imidate proof stop trying to coverup. Just admit what you've done so we can stop this rediculous 5 page bull post, I can't believe I read everything on here, talk about well spent time... We'll leave you alone if you just stop.. truce? Or I at the very least.

[diehrd]

I have to add 2 cents here ,,,I am sorry and dont mean to offend but I think this post is a lie.He never posted screen shots of his own system and it seems like he is talking a lot of B/S.



If it is true you have oced to that 1855 awsom great o/c.But 30 percent o/c on air cooled is kinda far fetched...

[train22]

Let's stop responding to it so it "passes out" or we'll have to, put in Hoot's words, go home.:p

[JAWS]

Gone for a week and miss ALL THE FUN!!!

[Treker]

Originally posted by AtomicGuY
i got little time once agian with postsecondary started and all and job but here is a quick double shot of the fans in the back of the tower. There is a total of 7 included with two powersupply fans in the rear of the tower, I'll also take a quick shot of the input flow fan in the front of the case which I'm really proud of, it realy keeps things flowing.

Dude, we are NOT that stupid, thats just the same photo done over again twice with a lil blur in the lower left fan for effect.. nice try.

-Trek

[Treker]

Originally posted by AtomicGuY
one last shot, this is the same as above except closer up!,

hey, anyone interested in moding there case to the extreme? Remember, any case can handle almost any number of fans. You just gotta have the right tools. For my design, I used a Dremal, Zigsaw and a sawdering iron.

Sorry man, but did you say you spent 4 hours modding that hole?

-Trek

[Treker]

Originally posted by AZZKICKER

show us the proof or shut up


Agreed, enough of this nonsense, show us the money or get the heck outa doge :)

Just spent 20 mins reading through all this bs, all this time, nothing but him dancing around posting proff.. I swear he'd make a good poloticiain, but frankly, I've lost all restraint on this one.

Lock or delete pleassssee, last thing we want is others trying todo this and ruining there computers.

-Trek

[Pinky]

*****I'm a naughty thread. I think I need to be sent to my room with no dessert.

Please discipline me ;) *****

[Justy303]

LOL!!!! Nice picture of the fans!! .... still laughin'.....

c'mon we're not this stupid!!

[Mr B]

One person asking for it to be locked might be a personal conflict between two people.

Several people asking...I think that shows the consensus of opinion as far as this thread is concerned.

Hmmmm.....


I got them keys around here somewheres....ahhhhh

Locked.

Mr B

[Shadow ÒÓ]

ROFL Mr B........... I think you and I have the same keys! =)