memtest errors please help

Alright well i added a second stick of twinmos ch-5 512mb so now im in dual channel for a 1gb total. My cpu is set at 2100+ at 11.5x200 for around 2.3ghz. My volts for mem is 2.77 and have timings as such
Cas 2.0
Rcas 3
ras 3
tras 7
anyway. I added a second stick and ram configuration 2-3-1-2-0
I got 16 errors in 1 pass.
259.8mb - 4 errors
275.6
275.7 - 2
275.8 5
etc

Whats going on. Should i worry about these errors even if my computer runs fine for every day gaming surfing and dling. What will i see happen during every day use because of these errors???

Anyway what can i do to fix these errors. up volts? Didnt think ch-5 liked high volts though plus anything lower that 2.77 gives mad errors.

Should i worry???

BTW im running on 8rda+ unofficial (non tested) 200 fsb board. Forget if i had errors with 1 stick as well but comp ran fine. BTW im talking right now from the same comp.

hmmmm. Havent tried 2-2-2-11

Tried 2-3-2-6
2-3-2-7
2-2-2-7
trying 2-3-3-9

WTF how did you get 2-2-2-11. Is that what im missing?? The 11??
Also ran all tests around 2.77 vdimm. My doesnt doesnt have vdd adjustment. Shouldnt this run fine at stock voltage though to reach 200fsb

BTW. Is 11 what ch-5 likes or the nforce boards like??

Doubt that you will get ch-5 to run x,2,2,2. I believe that CH-5 needs to have x,"3",x,x to run. I had some Buffalo CH-5 and it really liked 11,3,2,2.5.

try 2-3-2-11 or 2-3-3-11 if you have and nforce 2 based motherboard.