PDA

View Full Version : What PSU do i need?


Devi8r
09-05-01, 04:09 AM
I'm getting a AMD Athlon Thunderbird 1.4GHz "AYHJA" 266MHz FSB and a Epox EP-8K7A+ with 512mb crucial PC2100 DDR RAM, What would be the recommended wattage for the PSU?

It will also have the Voodoo 5 5500 64mb AGP graphics card and SoundBlaster Live!

Also I'm after a quiet but good Heatsink and fan for the 1.4 any ideas?

Cheers for the help:D

!-=sky=-!
09-05-01, 04:12 AM
i would recommend a brand name 450walt +

enermax, anatech and some others are good

also for a quiet heatsink u should be good with a glaciator

Devi8r
09-05-01, 04:16 AM
Cheers mate,
I had a look at an Antec sx840 with a 400w PSU would that be enough? and does paying for a brand name PSU help with overclocking? or are they all pretty much the same?

bdf24
09-05-01, 04:17 AM
I'm running a 431w Enermax. I'm happy with it. I'm also running an SK-6 with an 80mm fan on it. It's very quite.

Genis B
09-05-01, 04:20 AM
i have got 300watt and i've blow it up:D by changing from the 1.85 v t0 1.95, i now have a new powersupply but it's still 300 watt, cause i have got no choice, my vendor refuse to give me a 400 watt :D which is understandable.
my temp now is 43.7 idle with just slightly o/c to 1.33 from 1.2, i've drop it down cause i don't want to blow it again^^

Wega!
09-05-01, 05:19 AM
Originally posted by Genis B
i have got 300watt and i've blow it up:D by changing from the 1.85 v t0 1.95, i now have a new powersupply but it's still 300 watt, cause i have got no choice, my vendor refuse to give me a 400 watt :D which is understandable.
my temp now is 43.7 idle with just slightly o/c to 1.33 from 1.2, i've drop it down cause i don't want to blow it again^^

Why don't you buy another PSU, so you have 2 of them? That way you won't blow any of them, and you can overclock! :)

Hoot
09-05-01, 06:34 AM
The Antec 840 is an excellent choice, both as a case and a PSU. A good "One-Two" punch.

Hoot

Devi8r
09-05-01, 07:36 AM
Cheers guys

One last questions will the 400w PSU be enough to power my processor and graphics card etc...

Len
09-05-01, 07:40 AM
I'd go with an Antec PSU. I hear that Enermax PSUs and the Epox 8K7A have some compatibility problems related to the 5v power line.

A 400 watt should be plenty. I've got a 300 watt Antec PSU in my system and its running great. See my specs in my sig.

Wega!
09-05-01, 09:17 AM
Originally posted by Devi8r
Cheers guys

One last questions will the 400w PSU be enough to power my processor and graphics card etc...

Yep, 400W should be enough.

Subzer0
09-05-01, 02:15 PM
but i have to say ,my enermax eg651p{550watts} kickass! bigtime

TRANCER24
09-05-01, 03:55 PM
To save you some money i would run dual PS they would walk the dog over any single one also that is what i am gonna do to save me some money i am just gonna pick me up another 300 watter. 300 watt PS are cheaper then the 400s and up. you can check it out here >>>>

http://www.hardwareoc.com/dualpsu.php

Genis B
09-05-01, 07:31 PM
Originally posted by Walter:-)


Why don't you buy another PSU, so you have 2 of them? That way you won't blow any of them, and you can overclock! :)

where can i put the other psu then?