folding boxes, what do you got?

[fireball****aka fireball_87]

i think we did this a while back, but we can do it agan :)

duron 700@935
pIII 500@???(need better hs/f)
athlon "classic" 550
k6-2 350
k6-2 333(soon to become a duron 700 :D )
athlon 900(in a few weeks)
duron 750@???(frenids box, it'l be folding as soon as the parts arive)
a copple of boxes in tennissee(my uncles box's, never seen them)

unfourtenly none run conssisontly 24/7(some do once in a while) :(

[WillysNut]

Okay..here we go (Note: List subject to immediate change at time of paycheck arrival, based on impending bill payments that can be pushed off in favor of that shiny new processor thingy). :)

Duron 750@1000
Duron 850@1020
P3 933@1120
P2 300@370 (usually the celeron)
P2 333 laptop
P2 233 Laptop
P2 233 workstation

All told...4.309GHz..for now!

[phiber]

i suck compared to you guys

Tbird 1.2@1.366
P!!! 500@ Katmai processors cant overclock for *****

[burn'em]

P 1.5@1.65
1.2 Athlon
PIII 1.0 Laptop
850 Athlon @Work
Dual PII 450@504
Dual PPro 200

[William]

Celey 667@1ghz
Duron 700@933
P2 233(soon to be 300!!!)

thats it so far, i got 23 computers lined up i think(the head honcho is not wanting to put folding, but I am confident i will get them!).

[burn'em]

Originally posted by Would71
UGH.. this PC STILL won't Fold. It tries to do the first frame upon resuming, and the program just stops.

PC's also locking up a lot more, now that I had to put this temporary video card in it. I blame the old ATi drivers for this.

ya know I had a pc that was all screwed up doing wierd stuff. I went into "regedit" and deleted everything with ATI in it and it fixed it. I like ATI vid card but they don't uninstall the drivers very well.

[sfa ok]

Athlon 900@1000
Duron 850@850

and sometimes
Celeron 466@466, but it's been doing seti recently.

[Lancelot]

Celeron 800 @ 1056
Celeron 633 @ 633 (crappy IBM i810 mobo, not even OCable with softFSB)

[Ploaf]

Current boxes are:
Tbird 900@950
Duron800@800
PIII Notebook at 1000
Now if I could only OC my Duron I'd be happy. Today's project.

[thefly]

Axia 1 gig at 1430.

C'est tout.

[The-Last-Kehoe]

Here's what i got for you who aim to measure mine against yours :)

Tbird 1.4 @ 1.55 24/7
Tbird 1.4 @ 1.55 24/7
Tbird 1.2 @ 1.35 18/7
P3 800 @ 960 24/7

in the next two months
Celey 533@800 24/7
Tbrid 1G @ 1G 24/7
Duron 850 @ 850 or higher ?/7

and before christmas
Tbird 1.2 @1.2 24/7
Dual top of the line Athlons, whatever that may be!!!!!

before christmas i should have twice as much computing power set up as remote systems at other peoples houses as i will have in my own household. Anyone with large quantities of techy type friends should try very hard to do the same even if they sign them up for a different account or whatever
KEEP ADDING SYSTEMS
RECRUIT FRIENDS

[Ploaf]

As of this afternoon and the forums coming back online here you can add 200Mhz. The Duron is resting comfortably in a ECS K7AMA which appears to be nearly impossible to overclock. Tried the jumper setting and got nothing since the bios locks you out of voltage settings, etc. The experimental "hack the processor with a razor, dremel, whatever cutting the L6,L7,L4? bridges and repencil the appropriate bridges" worked but I ripped the Duron up pretty good. It is now folding at 1000Mhz at 1.8v. Stock HSF w/AS2 instead of the chewing gum that they had put on there to begin with. Been folding like that for about an hour now. Hopefully it continues to work.

[Gray16V]

Still beats my duron 800@988, but it folds all day without complaining :)

[WyrmMaster]

the box in my sig, soon to be a 1ghz tbird @ to be determined speed,

and 3 PIII 800's in my school cad lab, folding only at night and on weekends, but i think i will soon have 13 more of them.

[T. J.]

Tbird 1.0 @ 1.409
Tbird 850 @ 850
2 K6-2/500s

I added the second K6-2/500 to my collection today, and put a 12 port hub behind my router in anticipation of additional folders. Right now heat is the biggest issue. It was 30c in my computer room today... :eek:

[1g_raider]

1g T-Bird @ 1300
750 Duron not O/C'd
AMD K6-2 450 ( slow poke )

[Ploaf]

Originally posted by Gray16V
Still beats my duron 800@988, but it folds all day without complaining :)

Not quite yet. It locked up a couple of times after a couple of hours. Upped the voltage to 1.85(maxed out on the bridge setting) and will check it in the morning. There is no temp sensor for this thing but there was no sign of heat damage when I pulled the heat sink so I'm not going to worry about that too much. HSF is doing it's job nicely.

[JetMech]

Originally posted by burn'em


ya know I had a pc that was all screwed up doing wierd stuff. I went into "regedit" and deleted everything with ATI in it and it fixed it. I like ATI vid card but they don't uninstall the drivers very well. Tweakfiles has a small program named Reg Cleaner that I just downloaded and installed today. It gives you a visual list of all the software in the registry. If ATI is hanging around in there you will definitely see it. Its freeware.

[JetMech]

PIII700E@933, P41.7@1.9(setting up Network Neighborhood to bring this one on line).

[Superman53142]

Athlon 1Ghz@1000. I'd like to overclock it but it's the "family computer" so my dad thinks I'd break it by overclocking.

[Paul -The Mad Hatter]

I fold on my personnel rig.....

duron600 at default since my beloved 8k7a died on me and I'm running my old kt133 board which can't oc. :( I think the duron should do at least a gig, when my epox board was working i played around a little bit and got it to do 6x133 stable at default vcore so i think i can hit 1ghz.

[scoobiedoo]

I have a p3 750 laptop currently, soon to have a celeron 433@550 up and running within the week.

[DeepScience]

:) yay, a special welcome to Allycat who's going to be folding with me. Now to overclock your machine:D

[Brett]

PIII 650@820

PII 333@374

[Gray16V]

Originally posted by Ploaf


Not quite yet. It locked up a couple of times after a couple of hours. Upped the voltage to 1.85(maxed out on the bridge setting) and will check it in the morning. There is no temp sensor for this thing but there was no sign of heat damage when I pulled the heat sink so I'm not going to worry about that too much. HSF is doing it's job nicely.



My duron been running at 1.85v for over a month now with just a cheap coolmaster hsf, goes up to around 48c when folding

[Stanman]

Here is a partial list.:p

[Ploaf]

Originally posted by Gray16V




My duron been running at 1.85v for over a month now with just a cheap coolmaster hsf, goes up to around 48c when folding
OK.
It's been holding steady and folding steady at 1.85. The heatsink is barely even warm and it's cranking them out for at least 24 hours. Success! Next step is to buy a AYHJA Y and one killer MB for the main box and retire the KT7Raid/tbird 900 to folding only. When a good well tested alternative to the Tyan MP's comes out it will be time to start shopping again.

Stanman- LOL - "Donate your Celeron to a needy child & get some real CPU power...... AMD "