Anyone with AOL IM please help me!!! CPU!

[dborden]

I just got my new SK6 and 50 CFM fans for my case.

I improved the airflor greatly!!!

Problem is instaed of lowering me temps from 45-50c they ROSE to 51c-59c

What the heck happend!??!? I put the acII on again and it looks perfect. I don't understand this!

Please help me AIM me at davidborden1234 or yahoo dborden98

[!-=sky=-!]

how do you have the fans setup in your case?


how many fans do you have in the case?

what are you measuring the temps with? a digi-probe or just software monitoring?

[n2]

seems obvious to me that the heatsink is on wrong.
how one achieves this "feat" i dont know...
but obviously, the cpu must make tight, flat contact to the hsk base.

anything that carries the title "AOL" will cause me to become emotionally unstable in a violent manner... should it get anywhere NEAR my rig...

even if i had it... theres not much advice anyone could offer you than... ya did somethin' wrong!

look to see you plugged in the Hsk's fan... change fan header maybe... is it even on? turn it around? remove the extra grease... maybe theres too much?

did you crossover and connect bridges when unlocking the cpu?
if you cross- connect... this problem can arise...

thats all i got man... hth

[TranceBear]

Yea, sounds like mis-installed H/S combo. re-check and get back to us.

[SickBoy]

Those temps are definitely way too high for an SK6... I don't even crack 45 C under load when oc'ed to 1.33 GHz....

Make sure your ASII is extremely thin layer.... HSF should be adequately seated..... if you're using a shim, take it out for pete's sake... make sure no cables or anything have worked their way into your fan.... make sure you're not accidentally running 1.85 volts or more through that chip in your BIOS/jumper settings for vcore.... thats all I can think of for now.

SickBoy

[ReTiCuLeX]

david if u need help im always online ive had u on my list for a while now. my AOL s/n is ReTiCuLe1